What did you do to your JK today?

Replaced the Rubicon decal today.
IMG_8327.jpeg
IMG_8328.jpeg
 
Installed all new control arms. Freedom off road adjustables. Set em to factory length right now untill I get the rest of the suspension suspension and steering parts in. Then a total alignment to recenter the axles. Other than the stickers all being the same so they sit wierd when installed I have no complaints. Def took a lot of the wander out of the jeep
1000001585.jpg
1000001586.jpg
 
Did you have some symptoms that led you to this or just high mileage?

Battery light remained illuminated for three days straight. Prior to that it would illuminate in the morning and after a short drive, it would shut off. Which led me to believe it was actually my battery prematurely dying. But it wasn't. I also experienced lethargic shifting and a slight decrease in pep. Granted I only pushed it for approximately 2 1/2 days before I decided to pull the alternator. But I'm glad I did before I got stuck somewhere.
 
Added a Motobilt Hatchet stubby rear bumper to my 2015 JK and removed the rear fender inner liners to prepare for cutting the stock flares down over the week I am off. I really like this stubby bumper, it matches well with my cut down front bumper. I will mostly likely go with a Motobilt front stubby bumper at some point.

JKBumper1.png
 
Installed all new control arms. Freedom off road adjustables. Set em to factory length right now untill I get the rest of the suspension suspension and steering parts in. Then a total alignment to recenter the axles. Other than the stickers all being the same so they sit wierd when installed I have no complaints. Def took a lot of the wander out of the jeepView attachment 127462View attachment 127463
I put this brand on two TJ I had and was happy
 
  • Like
Reactions: plumberdoug
Finally sat down and drilled the knuckles for the ruff stuff 1 ton tie rod. It was a lot easier than I thought. Took about 5 mins a knuckle with the right bits. Used black oxide bits with some thread cutting oil I had laying around. Started with a 3/4 bit the did the 7/8. Milwaukee M18 drill for the win. Yes you see some wood blocks but I had Jack stands in place as well.
1000001720.jpg
1000001721.jpg
 
Next up is a new radiator and front sway bar disconnects. Oddly enuff when doin the tie rod I found a minor crack at the top of the plastic radiator side tank. May also put the new extended brake lines on as the previous owner appeared to be using stock lines as limiting straps😂. I can def tell this jeep spent its previous life in the mall parking lot.
 
Actually over the last week. The daughter got some 35” given to her and finally bought some rims for them last Saturday. The spare was too big. I told her she needed a tire carrier of some sort as it’s too heavy for the stock setup. Said she didn’t have the money, but wanted it on. Said could remove the bumper (illegal here in CA) or I could cut it. She decided to have me cut it. It was one of those jobs I thought would take a while, but was actually done in under a hour. I was trying to balance the tire on 4x and the floor jack to see how much I needed to cut. Son comes out on his way to work and says “why aren’t you using the hoist?” I replied “fabulous question and idea (thinking idiot to myself).
IMG_5789.jpeg
IMG_5798.jpeg
IMG_5801.jpeg
 
Last edited:
New radiator and jks swar bar disconnects installed. Next I gotta do the extended brake lines. Also had a good rebate coupon so I ordered a new Bilstein steering stabilizer. So close to taking it out once I get some free time. Thinking a beach cruise with the family and there's also a good lil off-road area with some various rock gardens for crawling.
1000001755.jpg
1000001756.jpg
 
New radiator and jks swar bar disconnects installed. Next I gotta do the extended brake lines. Also had a good rebate coupon so I ordered a new Bilstein steering stabilizer. So close to taking it out once I get some free time. Thinking a beach cruise with the family and there's also a good lil off-road area with some various rock gardens for crawling. View attachment 127581View attachment 127582
Nice! I like the adjustability of those.
 
  • Like
Reactions: plumberdoug
The scorching temputures in phila.pa are inspiring me to hang out down the linden ave River Park and slide some hot dogs on my antenna of VAFFANCULO let them bake in the sun and eat them with a few cold ones
So the hot dogs were good next time I'll be sure too slide a paper plate on the antenna first the juices from my hot dogs were dripping on my fender and cowl
 
  • Haha
Reactions: Speartip