Novak Conversions Jeep Wrangler JK engine mounts

What did you do to your JK today?

Well today was headlight repair day!!!! The LED's someone installed before I got it, the harness was loose.

Took more time to remove the grill than actually tighten up the harness. No pictures of this....

Then it was decal install time. This is did get pictures of.

20250809_110545.jpg


The dog decals are of my ACD Andie and my Australian Shepard Bailey. The wife and oldest granddaughter got those for me.

20250809_110601.jpg
 
Well today was headlight repair day!!!! The LED's someone installed before I got it, the harness was loose.

Took more time to remove the grill than actually tighten up the harness. No pictures of this....

Then it was decal install time. This is did get pictures of.

View attachment 129692

The dog decals are of my ACD Andie and my Australian Shepard Bailey. The wife and oldest granddaughter got those for me.

View attachment 129693
That's interesting. I had to put a zip tie to hold the headlight plug to 3 prong adapter in the factory wiring harness night before last. I thought I had a LED headlight going out. I have these in my JK & TJ. I really like them, if you decide to change yours.

https://www.amazon.com/dp/B0BJF3LR9N?tag=wranglerorg-20
 
  • Like
Reactions: JeepJeezy
Big modification today! 😂 Made some cinch straps for the soft top sail panels. I found that they tend to come loose if I run without the side windows and the rear window rolled up. I think the recommendation is to not go over ~35mph or so but I didn't like that. This config with the sun rider open is almost as good as the top fully retracted but quicker to provide shade or coverage overhead if required. I went for a test drive and everything stayed secure and in place with the straps.

PXL_20250816_160804989.jpg
 
That's interesting. I had to put a zip tie to hold the headlight plug to 3 prong adapter in the factory wiring harness night before last. I thought I had a LED headlight going out. I have these in my JK & TJ. I really like them, if you decide to change yours.

https://www.amazon.com/dp/B0BJF3LR9N?tag=wranglerorg-20

I got tired of my passenger side coming loose even with zip-ties. I cut factory plug off and put the led style one on. No problems since been at least 2 years.
 
Changed the oil, filter and engine air filter.

Does the JK have a cabin filter???? If so anyone got the part number??
The JK doesn't come with them, but you can add them very easily. Well at least on the 2012+. I think the only way they came factory with the 2012+ is IF it had the auto climate controls. They take about 5 minutes to add on the 2012+.
 
I think the only way they came factory with the 2012+ is IF it had the auto climate control.

Can confirm, my 13 with auto climate has a cabin filter. Drop the glove box, set your climate controls to recirc to drop the “door” and there ya go. I don’t have the number, your parts store will I’m sure.

BTW - it’s 2 smaller filters rather than 1 normal size, which brings to mind the saying…only in a jeep.
 
Novak Conversions Jeep Wrangler JK engine mounts