What did you do to your JK today?

@JeepJeezy, I've considered the overhead, but I've got a switch pod mounted above the mirror. Do you think the two would interfere with each other?
The mounting of the panel I don't think would interfere but maybe the trimming might? Send a few close up pictures of your setup. I'll try and send a few close up pictures of the panel for you to see.
 
  • Like
Reactions: Dirty Dog
The switch pod mounts to the loop, if that helps.
The panel does not mount to the loop. It mounts about an inch away on either side of the loop.

Screenshot_20231001_204331.jpg
 
  • Like
Reactions: Dirty Dog
I like that overhead rack, but the wife said she hated it so it never got any closer to our Eep than my Amazon cart…
Now that I’ve seen it, I wish she didn’t hate it.
 
@JerryD Honestly, I was thinking it would feel more closed in but it doesn't. Now, I'm only 5'10", maybe it would feel more closed in if I was taller? I'm glad I got it. Was able to free up a bunch of clutter from the back and put into the pouches.
@Speartip https://www.amazon.com/dp/B096X245N6/?tag=jkforum-20 there are no instructions but it's easy. I did not use the rivets that came with it. I also had to trim the plastic piece above the rear view mirror for the molle panel to fit. It wasn't much trimming. Glad I bought it.

Thanks for the intel . Looking closer at pic of your Install at the front . It’s a No Bueno in my case . I have a 6 switch overhead SPod that is mounted in the centre up top Sicks about about 1-2” in front of plastic bezel and hangs down about 1/2”. So don’t think would work .
But I was wondering if they made something like that mounted between rear passenger doors ? Possibly hung off of sport bar ? That would span the width of the Jeep over the rear seat .
Have you seen anything like that ? Did a bit of googling but didn’t come up with anything
D5829D5C-57FB-4895-BBBB-EB0D0CFF5881.png
 
  • Like
Reactions: Dirty Dog
Added washers behind the steering stop bolts to save our new tires from rubbing through the sway bar.
Read the instructions that came w/ my front suspension spacers… might do this today, might not.
 
Thanks for the closeups, @JeepJeezy. It looks like there would be interference between that and the switch pod. Which is unfortunate, because I do like the idea of that molle rack.
 
  • Like
Reactions: Speartip
Sold my factory wheels & tires for $300.
That means my upgrade to 285/70-17 K02's only cost me $200!

They guy is planning to use the tires on his Toyota 4-runner, and give the wheels to his buddy.

I even told him that I would buy back the TPMS sensors for $50 if he wasn't going to use them; and he agreed.

It's almost as if all of my JK issues are being solved today.
 
Thanks for the closeups, @JeepJeezy. It looks like there would be interference between that and the switch pod. Which is unfortunate, because I do like the idea of that molle rack.

I found these online . They might be just the ticket .
Mount on rear sport bar in the triangle part . Made by DV 8
Or there are those bags that mount in same area . Decisions ?
BAF42F98-B7ED-478D-92D8-EA6C9B19A322.png
460D87BF-240D-417A-B99F-525E6C9851DF.png
B4CBB60D-C985-4E4B-9C2A-FBE6010AC973.png
67C925AC-1C8A-4D9F-96BA-7B52297980BC.png
106F01BC-64E2-4825-876F-D889FB3B60AB.png
E39D1A84-F9B8-4CAF-A5D0-E36B8265245D.png
F164CFFA-300A-4377-8D59-6954A9654C0A.png
 
So I have been slowly working to get my Jeep ready to do a week long overlanding trip in early spring. Slowly getting smaller projects done. Today I started on my airflow when sleeping. I need a fan blowing when I sleep. I used a sheet of 12"x24"x1/8" black plexiglass, https://www.amazon.com/dp/B084T6NXP5/?tag=jkforum-20 . Mounted 2 12v usb computer fans, https://www.amazon.com/dp/B0C591NBXG/?tag=jkforum-20 . Then used this, https://www.amazon.com/dp/B0C4GVPWM6/?tag=jkforum-20 to make a seal between the plexiglass and my window. Then I get my 12v from a solar power bank, https://www.amazon.com/dp/B0BX8RRX9Z/?tag=jkforum-20 . The power bank and power switch are held on by velcro commands strips. I also added screen door mesh to cover the fans to keep the bugs out. I'm brainstorming what to use to keep the rain out if it were to rain. Next on my list is an elevated platform to sleep on and to have storage underneath it.

20231005_164822.jpg


20231005_164848.jpg


20231005_164857.jpg
 
So I have been slowly working to get my Jeep ready to do a week long overlanding trip in early spring. Slowly getting smaller projects done. Today I started on my airflow when sleeping. I need a fan blowing when I sleep. I used a sheet of 12"x24"x1/8" black plexiglass, https://www.amazon.com/dp/B084T6NXP5/?tag=jkforum-20 . Mounted 2 12v usb computer fans, https://www.amazon.com/dp/B0C591NBXG/?tag=jkforum-20 . Then used this, https://www.amazon.com/dp/B0C4GVPWM6/?tag=jkforum-20 to make a seal between the plexiglass and my window. Then I get my 12v from a solar power bank, https://www.amazon.com/dp/B0BX8RRX9Z/?tag=jkforum-20 . The power bank and power switch are held on by velcro commands strips. I also added screen door mesh to cover the fans to keep the bugs out. I'm brainstorming what to use to keep the rain out if it were to rain. Next on my list is an elevated platform to sleep on and to have storage underneath it.

View attachment 125335

View attachment 125336

View attachment 125337


Well that’s kinda cool .
You don’t think “window shades” would keep out the rain ?
 
  • Like
Reactions: JeepJeezy
@Speartip I see those are for a JL. Would they work for a JK? I've seen the bags and on the fence about them. I also found these https://www.amazon.com/dp/B0BXD4ZHHG/?tag=jkforum-20

I’ve gone with the roll cage bags and they worked for me. Got my removable roof panel bag in them, the outside pouches hold some hand tools and spray lube. When I haul my golf push cart to and from the course, all the detachable bag accessories get stowed in them too. Still plenty of room left for other smalls.