1. J

    Montana FREE 2008 JKU rear bumper

    Just installed the Barricade Trail Force HD rear bumper to match the front. Anyone need a rear bumper and hardware? Just pay for shipping... Is this allowed here? Or come pick it up in Cut Bank, Montana. Lol. Unless you're in Great Falls, or Kalispell, Montana... closest "cities". I don't...
  2. FoxHole

    What size fridge will fit behind the driver's seat?

    First post here!! I have a 2015 JKU, and I'm wondering what the largest size fridge will fit behind the drivers side rear seat. I will be getting a slide under it too, which will make it taller and hit the top of the rear seat. I've been looking at Dometic and ARB models, but without actually...
  3. E

    Illinois 10 Year Anniversary Wheels and Tires (set of 5)

    5 Wheels and tires - Not tread left on the tires (with the exception of the spare). Wheels are in good condition (typical wear and tear for 7 year old wheels).
  4. J

    Before and after pictures

    replaced the stock fenders with rough country tubular fender flares replaced the bumper with the barricade trail force HD front bumper (still need to replace the back) added the smittybilt gen2 x20 12,000 lb winch (already pulled a bunch of deadfall lodgepole pine up a hill) ordered the DV8...
  5. Gavlillie

    Can I switch to 17" wheels from my 18" wheels?

    My 2012 Sahara came with the stock 65x70 r18 in rim , can i switch to a 65x70 r17 in rim without any noticeable difference or problems? Or should I stay away from that? Thanks
  6. Gavlillie

    Christmas Ideas

    My son has a JKU Sahara and I want to get him some things for it for Christmas, its completely stock besides headlights, any ideas? Thank you
  7. DogsandDirtTrails

    Road Trip Out West

    Hey this is my first post here, I'm new to the jeep life. I just got a 2011 JKU sport and its great. I am planning a road trip out west from north carolina and I wanted to get any body else's input on where to go and what I should do to my jeep before I head out there. Right now I want to be...
  8. mfosler

    Turn signal / parking light issue

    A few weeks ago my driver's side front turn signal stopped working along with the parking light on my 2011 JKU. Put in a new bulb but still nothing. I replaced the actual lamp socket and was able to get the turn signal working again but not the running light. Also, when the parking lights are...

    Heim Joints vs 1 Ton TRE's for Steering

    Alright to begin, hey new member here 👋 and I'm glad to be a part of the forum! I need some insight on picking a good steering setup. I have a 07 JKU and having trouble deciding whether to go with heim joints or 1 ton TRE's. I daily drive my Jeep and also use it off road as much as i can. Can...
  10. Dr23ew23

    New To The Jeep Life

    Smittybilt XRC Rear Bumper Smittybilt SRC Front Bumper Xprite Halo Headlights, Fog Lights, Blinker Lights Xprite Grill Rough Country 2 1/2 Lift 35x12.5x17 Yokohama Geolander MTs
  11. Dr23ew23

    Best Tire Carrier To Get?

    Just upgraded to 35 in Yokohama tires and need an upgraded tire carrier. Bought a relocation bracket off Amazon, and let’s just say I’ll be returning it. Please help.
  12. O

    Check engine light on after transfer case fluid change

    Need HELP! Just changed the fluid on transfer case (60K Service). I used MOPAR's ATF+4 SYNTHETIC. I have on my 2014 JKU Manual 6 Spd Sport - (lifted, on 35s - incase that matters) I was only able to get 2 quarts in before fluid came out of the fill hole when I was adding the new ATF+4. When i...
  13. J

    Clunking/knocking sound from rear

    The past several times I've been light wheeling I've been hearing a clunk or knock sound from what sounds like the passenger rear quarter. It almost sounds like I'm bottoming out or hitting bumpstop but the sound happens on very minor stuff, just driving down the trail. But I haven't noticed the...
  14. Joel

    Noise when pushing in clutch

    So my Jeep started making this noise when I push in the clutch, anyone know what the problem might be?
  15. J

    Clutch issue

    Just finished replacing the throw out bearing, clutch, and pressure plate and the clutch pedal goes to the floor. Replaced the slave cylinder, bled it, no help. New master cylinder ordered and on the way. Does it have to be bench bled? Any thoughts on what else may have happened?