Search results

Agree! Hidden Falls Adventure Park in Marble Falls, TX here is pretty fun, they have some creeks and waterfalls and you go through, just gets that white dust wet and it slings it up everywhere, so I guess "mudding" isn't the 100% accurate term, considering I grew up in Houston and it's a...

Good info....I own a 2005 TJ and 2008 JK both with the NSG370, the TJ 4.0 and the JK the 3.8...and yesterday got a CJ5 again like my first Jeep in College. 1. Engine alone, the TJ in my opinion. 2. Driving....the JK started the phase that these are now SUVs. The TJ is still a Jeep. That's...

So don’t you need to keep looking at the details and find the leak, then change the component

It sure if this is your original 2012, but 10 years hoses can go, so can water pump. I always start simple. 1. You’ve got to work this, so don’t put any more coolant in for now. I’d put in distilled water and fill it. 2. Run it and follow hoses. Hoses to heater core and to water pump...

So, the H13 passenger was all coming apart.l inside, so I unpinned the 3 and then took them off the wire mostly, as to not lose any (there is literally very little to work with) I left the crimp on front the connector. They are on super tight. I then put a larger blade connector, and crimped...

Has anyone else just taken an H4 pigtail connection and cut off the H13 headlight connection? These H13 suck in my opinion, and both on my sons 08 the dam clip no longer really snaps in, etc. so I’m changing them either way, just figured why not switch to H4 while I’m cutting, crimping and...

Curious to hear what your guy sees. My 08 that my son drives was all over. 1. Did Dry steering test big time. There was some loose this and that.(don’t remember, tie Rod I think) 2, 2” lift and BFG 35’s, I had to get adjustable control arms (upper) and dial up the Caster , this was a...

Got ya. My 08 do the exact same thing 3 weeks ago. Son drives it home from Army, and just nothing, proper voltage everywhere. Pulled that blade connection, used needle nose to squeeze the connector down, and it was tight to go on, but bam, zero problem. I’m not sure that’s a common issue, but...

Isn’t there a deal where there were Rubicon’s that had the Dana 44 HD which meant a 32 spline count? I don’t know if that meant a different shaft on the front or not, but with that big of a difference in a part, that is the place to start. I’d pull the diff cover and se show it goes in etc...

It sure what this means. What cable? What cable came off, how did you get it to start and run for a week?

So got my son’s 2008 working. I put a multi meter in the relay sockets and got 12.7 when my son turned the key. I then took out the starter. Connected the battery back up and ran a jumper cable to the Neg battery. I touched it and the starter main, got 12.7. Then the Ignition wire ti the...

Curious if you made progress here. If I read correctly, here was your status: 1. The battery is new, so you have full cold cranking amps 12.4V+ 2. Your starter works, it engages if you take it off and have it bench tested (although, I have had one that passes at Autozone but won't turn a car...

So I went to Napa this morning deciding I can put one on and have it as a daily driver and get this one rebuilt they had a remanufactured Mopar Chrysler for 60 or 65 bucks with a $60 coffee which I’ll go back and get so now I have a reman Chrysler with the Chrysler stamp Mopar part so there you...

You know where to find that actual part #? I'm looking, and will keep, but if I can, then I can search eb\ay for a Mopar reman and make sure it's the right part#. I don't mind reman, just don't want chinabuilt autozone

Thanks. I’m neck deep in it, ha. So the brakes are toast, my 19 year old son only doesn’t maintenance when I move it and say “that’s sounds jacked” Argh. No huge deal, pads and rotors, and I’m doing the ebrakes too. Did the driver, all good, for clear fluid, all good Pulled the passenger...

Got my boys 2008 JK replacing rear brakes. The passenger caliper is toast. Just reading I should make sure it bleeds, sounds like a rubber hose issue is out there. I’ll do that, but is this a “Mopar” only part for some, or aftermarket?

My son's 2008 JK has been a pain. I replaced the battery in December, so it's not the issue. If I leave it a few days, it won't start. I've pulled everything but the cables to start it. The issue that I'm seeing is that my son is driving it, I'm checking the battery and it looks to be...

Have a 2008 JK 2 Door. I replaced the battery a month ago, and went back out and dead. Anyone have a good process to figure out what is drawing and draining the battery overnight? I had the Jscan OBD on there, and took it off. Anyone have any pointers to possible draws? It has some extra...

Yeah, I was finding that today too. It was one of those nights I just was under it looking, trying to see what exactly is the issue after what I've done to work it. The bottom of the filter is pretty wet, but it's wet all up behind the harmonic balancer. I cleaned it all once, and I think...

https://chrysler.oemdtc.com/147/3-8l-engine-oil-seepage-due-to-front-timing-cover-surface-porosity-2007-2008-jeep-wrangler My son's 2008 JK 2 door with the 3.8 and NSG 6 speed has leaked oil since we've owned it. I've changed the pan gasket, and I'm very confident this is not the issue now...