Latest activity
-
NNickyB replied to the thread Possible WCM issue.Hello i just spent over a 1,000 for a starter and several trips back to the shop. My jeep is still doing the same thing. That...
-
BLACKJKU replied to the thread 2015 JK traction control issue.Anything that's associated with the front axle and steering gearbox will cause that. -
That makes sense. I don’t know what has led to the increased play in the steering - certainly no event that stuck out as potentially...
-
pc1p replied to the thread Caster question.It certainly can argued for or against validly... For me it depends on the rig. On a JKU, where the arm geometry is pretty decent and... -
Personally, I would not do a lift without adjustable lower control arms. Even a 2 inch lift. Although I do agree you can. Just in my...
-
Kkn752 replied to the thread 2015 JK traction control issue.That makes sense. I don’t know what has led to the increased play in the steering - certainly no event that stuck out as potentially...
-
MMopar replied to the thread Caster question.Personally, I would not do a lift without adjustable lower control arms. Even a 2 inch lift. Although I do agree you can. Just in my...
-
MNo - your caster angle is the difference between true 0° and imaginary line that runs through your balljoints centerline when viewed...
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).I went back and cleaned up all the wiring for the transmission and shifter. I ended up using a small aluminum plate under the glove box...
-
-
pc1p replied to the thread Caster question.No - your caster angle is the difference between true 0° and imaginary line that runs through your balljoints centerline when viewed...
-
-
BLACKJKU replied to the thread 2015 JK traction control issue.That can make your traction control activate if your having to move the steering wheel back and forth any to keep going straight.
-
Updated picture. Cage came out this morning to get fully welded, sand blasted, and painted. -
UWe are guessing. We really don’t know since we aren’t there to make measurements and check things. We don’t know the measurements of...
-
MMopar replied to the thread Caster question.We are guessing. We really don’t know since we aren’t there to make measurements and check things. We don’t know the measurements of...
-
UUnitize replied to the thread Caster question.I think I’m understanding more what you’re saying. I apologize as I’m still pretty new to this, so the difference between the...
