Latest activity

What's new Featured content New Posts Latest activity
  • K
    kn752 replied to the thread 2015 JK traction control issue.
    That makes sense. I don’t know what has led to the increased play in the steering - certainly no event that stuck out as potentially...
  • M
    Mopar replied to the thread Caster question.
    Personally, I would not do a lift without adjustable lower control arms. Even a 2 inch lift. Although I do agree you can. Just in my...
  • M
    Mopar reacted to pc1p's post in the thread Caster question with Like Like.
    No - your caster angle is the difference between true 0° and imaginary line that runs through your balljoints centerline when viewed...
  • pc1p
    pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).
    I went back and cleaned up all the wiring for the transmission and shifter. I ended up using a small aluminum plate under the glove box...
    • IMG_9089.webp
    • IMG_9090.webp
    • IMG_9098.webp
    • IMG_9100.webp
    • IMG_9097.webp
    • IMG_9102.webp
  • pc1p
    pc1p replied to the thread Caster question.
    No - your caster angle is the difference between true 0° and imaginary line that runs through your balljoints centerline when viewed...
    • caster_diagram.webp
  • BLACKJKU
    BLACKJKU replied to the thread 2015 JK traction control issue.
    That can make your traction control activate if your having to move the steering wheel back and forth any to keep going straight.
  • WSS
    WSS reacted to mjonesjr84's post in the thread What did you do to your JK today? with Love Love.
    Updated picture. Cage came out this morning to get fully welded, sand blasted, and painted.
  • U
    Unitize reacted to Mopar's post in the thread Caster question with Like Like.
    We are guessing. We really don’t know since we aren’t there to make measurements and check things. We don’t know the measurements of...
  • M
    Mopar replied to the thread Caster question.
    We are guessing. We really don’t know since we aren’t there to make measurements and check things. We don’t know the measurements of...
  • U
    Unitize replied to the thread Caster question.
    I think I’m understanding more what you’re saying. I apologize as I’m still pretty new to this, so the difference between the...
  • tJKrider
    tJKrider reacted to pc1p's post in the thread Caster question with Like Like.
    Caster is measured against true vertical. Assuming your angle finder was zero'ed out appropriately, it's very likely the cause of your...
  • U
    Unitize reacted to pc1p's post in the thread Caster question with Like Like.
    Caster is measured against true vertical. Assuming your angle finder was zero'ed out appropriately, it's very likely the cause of your...
  • U
    Unitize reacted to Mopar's post in the thread Caster question with Like Like.
    I have a 3.5 inch lift (actual measurement is closer to 3 inches) and it was on it when I bought it. It had a few things wrong with it...
  • U
    Unitize reacted to Mopar's post in the thread Caster question with Like Like.
    I did a screenshot of this from another site and it’s a good general guide to start from for lower control arms measurements.
  • Cimmerian
    Cimmerian reacted to mjonesjr84's post in the thread What did you do to your JK today? with Like Like.
    Updated picture. Cage came out this morning to get fully welded, sand blasted, and painted.
Show older items
Top Bottom
Back