Looking for recommendations for front bumper and winch (2015 JK 2 door). My jeep is stock, no lift, and Im looking for something that would not adversely weigh down my front end, minimize any sag. thanks
Looking for recommendations for front bumper and winch (2015 JK 2 door). My jeep is stock, no lift, and Im looking for something that would not adversely weigh down my front end, minimize any sag. thanks
Gotcha, makes sense, thanks!You will need to get a aluminum front bumper if your concerned about the weight. Then mount a winch on a receiver on the front so that you can remove it when you don't think you will need it.
That looks great!!
Is weight on stock axle much of an issue even if there is some sag?You will need to get a aluminum front bumper if your concerned about the weight. Then mount a winch on a receiver on the front so that you can remove it when you don't think you will need it.
Thank you good to know! Great infoMaybe an option would be to find a used bumper from a Rubicon Recon or HardRock and then use an aftermarket winch plate to mount the winch. I have a RHR and the steel bumper isn’t all that thick / heavy in my opinion. Of course on the other I wasn’t overly concerned about the additional weight as I think sag is minimal and I don’t think overall it affects ground clearance to a level that is really a big issue. It may slightly affect the approach angle. My wife has a smittybilt bumper and winch and it is working well. There wasn’t a noticeable sag in the front to the naked eye from before to after.