Search results

I purchased a used 2013 Jeep Wrangler JK 4 door with a 3 inch lift. I fought darty loose feeling steering That seemed to follow every crack in the road. I checked the ball joints rod ends, replaced the steering damper and shocks performed the chock test and adjusted air pressure accordingly...

Hey guys On my 2013 Jeep Wrangler when I turn on the high beams the left light looses all power and turns off the right side works fine. Any suggestions on what to look for?

I purchased a Fox 2.0 steering stabilizer and installed it. Now I would like to install another one on the other side. Is there a bracket kit do this or am I stuck with removing the single and purchasing a duel stabilizer kit?

It feels like the back end of the Jeep moves from side to side when the road has grooves or sharp bumps. The faster you drive the worse it gets.

Hey guys 2013 Jeep Wrangler Sahara limited 2.5 lift 33” tires. I think my darty feeling is coming from the rear. I took it on a long highway drive and it feels like I am chasing the rear? Ideas on what to check?

That has been the method I have been using.

Thanks guys. I thought that may be something was wrong. That was an easy fix! Lol

When I shift the transfer case into neutral there is no indication that shows me that the transfer case is in neutral. Is there supposed to be a light?

You are correct, I live in lake Havasu and it is 120 in the summer. The roads get groves and stuff that the tires like to climb. My Jeep has a 2.5 inch lift and 33X12.5/18 all terrain tires that are pretty square edged. The Jeep has 122k miles on it and the factory steering stabilizer was pretty...

I purchased this Jeep used and I can not figure who makes this bumper. I would like to purchase the grill guard for it.

It does not bump steer, it is really affected by grouves in the road add in a cross wind and it is a hand full at 65mh.

I took it to a guy here in Havasu that is known to be ”the guy” for jeeps. He looked a it and noticed that it stll has the stock Shocks and steering damper and it has 122k miles. He said that the tire wear looks real good and if it was his jeep he would purchase a good steering damper like the...

I just purchased a 2013 Jeep Wrangler Sarah unlimited with a 2” lift and 33/12.5/18 tires It has 122k miles on it. It is darts from side to side like it has bias ply tires with toe out. I checked the tow setting and it is 3/16 toe in. I checked the ball joints and I can not see or fill any...

Today I went inside the fuse box and removed Fuse M1 (the brake light fuse). I ran a wire from each side of the fuse socket with an inline fuse to a water proof toggle switch mounted behind the bumper. Now I can flip the switch and turn off the brake light power from the jeep. Now with the...

Diodes will not fix the brake light power from the jeep washing out the blinker Signal from the tow vehicle When the braking system pushes the brake peddle.

I would like to put a switch that will disconnect the brake light switch when I flat tow the jeep. What color wire would I need to put the switch on? Thanks