Search results

Yes, there’s play on the bottom of the splined shaft to the pitman arm, I’ll see if I can tighten it anymore

This is a vid of what’s happening

I looked at my front end while someone was turning my wheel and it looks like there is play where the pitman arm connects to the steering box, would this be the problem to both problems?

My traction control light and my ESP/BAS light went on and my OBD2 scanner said steering angle sensor. is there a way to easily reset it or do you think I should just bring it to the shop? FYI I put a 3.5 inch lift a few months ago and its been fine, and then the light just turned on a few days ago

Do you think this would throw the steering angle sensor code?

My transmission shifts better now and i can now get to higher speeds again and keep the speed better. My steering wheel is center while driving straight, but if I turn my steering wheel from one direction to another there is a little "lag" or "slop", I believe it is with my pitman arm. I put in...

would that cause a steering angle sensor too?

My traction control light and my esp/bas light came on while driving and the OBD2 scanner just came in and the code for steering angle sensor and tire revolutions range. any thought on what that could be? Good news, the OBD2 scanner came in and I put in the tire size and I'm now getting around...

I usually don’t use my fogs anyways, I just use them as blinkers and Side markers, do you think if I hook up the oem blinkers to my system this might fix the problem, or if I find a resister that can hold enough power to trick the system with the right enough of power

https://www.amazon.com/gp/product/B082LWHTGC/?tag=jkforum-20 this is the lights I got, they are just from amazon, I'm not using my normal turn signals because i have a different bumper so i put the fogs where the blinkers would go.

Does anybody know around what gas millage I should be getting with 35-inch tires and a 3.5-inch lift, with the 3.8 engine? Just curious

I ordered an obd2 sensor so I will see if that solves the issue with the gas mileage, and I will relay my results if it works or not

I installed a full kit that came with headlights and fogs and they both act as turn signals, I put one set of resisters in and there is still a hyper flash, the resisters are hooked up to both the headlights and the fogs, but on the box, it said they were only good for a singular pair of turn...

Would an obd2 sensor with jscan fix this problem also?

okay thank you

would it be worth performance wise to get a performance one or find a cheaper one with no performance gains?

okay, thank you, I found out that I do have 4:10 gearing, so should I think about regearing?

okay, I will recalibrate my speedo and see if that helps. Should I bring it to a shop or should I order something to recalibrate it?

I have stock gearing, so I believe 4:10, and I haven't recalibrated my speedo, would recalibrating make a noticeable difference?

I installed LED headlights/ Blinkers and now my Blinkers HyperFlash, any way to fix this?