pc1p's latest activity
-
pc1p reacted to BVlads51's post in the thread 2012 JKU check engine at high RPM, then turns off with
Like.
I have not, I will check now. Thank you! -
pc1p replied to the thread Anyone ever use this service?.If you have a 2012+, you can program your ECM with a handheld tuner (like HPTuner), though the more common ECU interfaces (like JScan)...
-
pc1p replied to the thread 285/75/17 on stock wheels? 315s?.I ran 285's on 4.75" BS wheels and they rubbed the inner fender and sway bar quite a bit at near-full lock (on a 2.5" MC Gamechanger)...
-
pc1p replied to the thread 3.8 misfire.Since you had misfires on the same side, this was my first guess - so glad that you found it. The strap goes from the back of the...
-
Found the braided ground totally rotted of down at the block. Now I need to find the other end and reconnect. Hopefully this solves the...
-
Traded the old JK Sahara for a Gladiator. Though I haven’t posted much as of late I still lurk from time to time. Thanks for all help...
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).The Motobilt Rear Fuel Tank Kit arrives today, so over the weekend, I worked on getting it ready. The first step was getting the fuel...
-
-
I have an older (2009ish) teraflex dana 60 and teraflex track bar installed on my JKU. I just installed a Rebel Recon coil over kit and...
-
pc1p replied to the thread Regearing 4:56 vs 4:88.Is that $200 to replace the OEM carrier? If so, and if warranted, you may want to consider going with something like a TrueTrac in the...
-
^^ This! I bought my JK for those very reasons. I took it over to Dallas Offroad today to discuss the swap. Price went up a bit...
-
Dropped the Jeep off for the regear. I hope I don’t get the same bad news. After my small lift I made need to get an adjustable rear...
-
Going to an 8spd will to certain extent. Just look at the gear ratios in the first 5 gears for an apples-apples comparison...
-
@pc1p, you are a wealth of information. Thank you so much. That above post is stellar! This quote is how I feel right now with 3:73 on...
-
Unpackaged the Wilwood calipers to see what I needed for brake lines. I'll be ordering some custom ones to either go to an AN fitting or...
-
pc1p replied to the thread Regearing 4:56 vs 4:88.How I see it, you really can't compare the 5 gears in the NAG1 directly to the first 5 gears of the 8HP70, at least not in any "apples...
-
