Latest activity

What's new Featured content New Posts Latest activity
  • BLACKJKU
    BLACKJKU replied to the thread Transmission fluid level too high?.
    It's very possible that whoever did the work overfilled it, drain some out then drive it for a few miles and recheck.
  • BLACKJKU
    BLACKJKU reacted to SirNajera's post in the thread Transmission fluid level too high? with Like Like.
    I have tried both, but the manual says to do so in park so that is what I have done the most recent 3 or 4 checks
  • S
    SirNajera replied to the thread Transmission fluid level too high?.
    I have tried both, but the manual says to do so in park so that is what I have done the most recent 3 or 4 checks
  • BLACKJKU
    BLACKJKU replied to the thread Transmission fluid level too high?.
    Are you checking the fluid when it's in Park or Neutral? I don't own a Jeep with a Auto so I don't know if they get checked in Neutral...
  • S
    SirNajera posted the thread Transmission fluid level too high? in JK General Discussion.
    Hello all, hope everyone is having a great week. A few months ago (Late December) I had the transmission lines replaced after there was...
    • 20260421_Transmission Fluid Hot.jpg
  • pc1p
    pc1p reacted to Jermbob28's post in the thread Harbor Freight Badlands Apex Winch with Like Like.
    I disagree to some degree and think that is should be able to handle that pull. I can post several other links of failure for that...
  • pc1p
    pc1p reacted to Duster's post in the thread Harbor Freight Badlands Apex Winch with Like Like.
    We always used black powder or dynamite to remove stumps. For a stump to pull readily with Wrangler Star's method, you need the right...
  • pc1p
    pc1p reacted to Mopar's post in the thread Overheating with Like Like.
    Make sure you bleed the radiator well. Any trouble codes? Is the radiator fan running when the temps are in the 225-230 range? Does...
  • pc1p
    pc1p reacted to Mopar's post in the thread Overheating with Like Like.
    Color hasn’t been standardized in coolants. You want an OAT coolant. Do NOT mix OAT and HOAT. Personally, to be safe I don’t even mix...
  • pc1p
    pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).
    Radiator hoses and A/C lines are done, so I'm turning to the battery cables. I'm using tinned copper, 2AWG cables for basically...
    • IMG_8712.JPG
    • IMG_8709.JPG
    • IMG_8708.JPG
    • IMG_8706.JPG
    • IMG_8664.JPG
    • IMG_8663.JPG
    • IMG_8661.JPG
    • IMG_8660.JPG
    • IMG_8714.JPG
  • BLACKJKU
    BLACKJKU replied to the thread Overheating.
    The best and easiest way to get air out of the cooling system is to jack up the front of the Jeep at least 6". Then take radiator cap...
  • BLACKJKU
    BLACKJKU reacted to Mopar's post in the thread Overheating with Like Like.
    I just reread your post and saw you said you didn’t have cabin heat. That’s an indicator of air in your cooling system.
  • M
    Mopar replied to the thread Overheating.
    I just reread your post and saw you said you didn’t have cabin heat. That’s an indicator of air in your cooling system.
  • mrjp
    mrjp reacted to BLACKJKU's post in the thread Overheating with Like Like.
    If you mix different types of coolant together they will cause the coolant to get thick and not flow like it's supposed to.
  • mrjp
    mrjp reacted to WSS's post in the thread What did you do to your JK today? with Like Like.
    Ok, the pro comp lights list as 4” od, how big is the hole in your bumper? Do these mount behind the front of the bumper? If they fit...
Show older items
Top Bottom
Back