Latest activity

  • TonyPoz
    TonyPoz replied to the thread ESC light.
    My ABS light isn’t on. I used my code reader to check the ESC system and it showed a fault in the vacuum pump.
  • Largehit71
    Largehit71 reacted to Flipx99's post in the thread What did you do to your JK today? with Like Like.
    Lift installed 35s installed
  • Largehit71
    Traded the old JK Sahara for a Gladiator. Though I haven’t posted much as of late I still lurk from time to time. Thanks for all help...
  • Cimmerian
    Cimmerian reacted to 5.0rick's post in the thread Squeal from front of 3.6L with Like Like.
    I believe I have confirmed that it is indeed the PCV (valve). I used a hose to listen for the noise (ear plug in the other). The source...
  • M
    Mopar reacted to Jskunk's post in the thread H6 or H7 battery with Like Like.
    You would have to move the purge valve thats why I decided not to do it. Not a huge deal but not something I felt like doing.
  • tJKrider
    tJKrider reacted to 5.0rick's post in the thread Squeal from front of 3.6L with Like Like.
    I believe I have confirmed that it is indeed the PCV (valve). I used a hose to listen for the noise (ear plug in the other). The source...
  • 5
    5.0rick replied to the thread Squeal from front of 3.6L.
    I believe I have confirmed that it is indeed the PCV (valve). I used a hose to listen for the noise (ear plug in the other). The source...
  • Jskunk
    After shaft/u-joint replacement sound is still there, but slightly different. So, I think the shaft has something to do with it just not...
  • Jskunk
    Jskunk replied to the thread H6 or H7 battery.
    You would have to move the purge valve thats why I decided not to do it. Not a huge deal but not something I felt like doing.
  • BLACKJKU
    BLACKJKU replied to the thread 3.8 misfire.
    Let us know.
  • BLACKJKU
    BLACKJKU reacted to ktm909's post in the thread 3.8 misfire with Like Like.
    Found the braided ground totally rotted of down at the block. Now I need to find the other end and reconnect. Hopefully this solves the...
  • Z
    I have a 2.5” lift and 3.73 gears, those aren’t an issue. Would like to go a bigger tire, while using the stock willys(same as...
  • S
    spectraham replied to the thread Squeal from front of 3.6L.
    when you rotate the pulley it should fell clean and no resistance at all, remember there is a lot of pressure on these pulleys even the...
  • tJKrider
    tJKrider reacted to ktm909's post in the thread 3.8 misfire with Like Like.
    Found the braided ground totally rotted of down at the block. Now I need to find the other end and reconnect. Hopefully this solves the...
  • K
    ktm909 replied to the thread 3.8 misfire.
    Found the braided ground totally rotted of down at the block. Now I need to find the other end and reconnect. Hopefully this solves the...