Latest activity

What's new Featured content New Posts Latest activity
  • WSS
    WSS replied to the thread Scared to drive ol' Red: another death wobble story.
    Good news! Like the tires too. I like the tread. Would make great crawler tires.
  • AUBoggs
    AUBoggs reacted to BLACKJKU's post in the thread Scared to drive ol' Red: another death wobble story with Like Like.
    Have you checked for play in the steering gearbox, have you done the chalk test on your tires so that your not overfilling them?
  • JeepJeezy
    JeepJeezy reacted to Jskunk's post in the thread Scared to drive ol' Red: another death wobble story with Like Like.
    After installing the RPM Steering kit including drag link and tie rod assemblies, stabalizer clamp, and Rancho stabalizer, and the new...
  • Jskunk
    Jskunk replied to the thread Scared to drive ol' Red: another death wobble story.
    After installing the RPM Steering kit including drag link and tie rod assemblies, stabalizer clamp, and Rancho stabalizer, and the new...
    • d22a3298-5ab6-4d67-bf30-946768755b0f.jpg
    • d6eb2af4-94ff-41c3-80cc-274c64283985.jpg
    • 315d6ab3-7cc0-4860-bd4c-ebcc4b796e22.jpg
    • 9cf9cd5b-f564-419d-84cb-fef3501bffe7.jpg
  • WSS
    WSS replied to the thread J8 booster talk.
    Ohh, here was a poo finding, The O ring or seal between the MC and booster was not seated correct, it was pinched and half inside the...
    • IMG_9898.JPG
    • IMG_9897 3.jpg
  • WSS
    WSS replied to the thread J8 booster talk.
    I have made some progress. It is all out. Not fun or easy but out. I had to cut a bunch of wires that went through the firewall AND...
    • IMG_9904.JPG
    • IMG_9911.JPG
    • IMG_9909.JPG
    • IMG_9908.JPG
    • IMG_9907.JPG
    • IMG_9906.JPG
    • IMG_9901.JPG
    • IMG_9913.JPG
  • WSS
    WSS replied to the thread Adjust brake booster stud placement.
    Could you drill the four booster stud clearance holes bigger with a step drill? Would that give the room needed?
  • WSS
    WSS replied to the thread J8 booster talk.
    I don't have a pressure pot/bleeder. will check with my local parts place and see if they rent one. I do have the jscan that can...
  • Cimmerian
    Cimmerian reacted to Anybodyhome's post in the thread J8 booster talk with Like Like.
    I've read the same as the ABS system needs to be inactive to bleed the individual calipers, and the system needs to be reactivated to...
  • WSS
    WSS reacted to Anybodyhome's post in the thread J8 booster talk with Like Like.
    I've read the same as the ABS system needs to be inactive to bleed the individual calipers, and the system needs to be reactivated to...
  • Mike B
    Mike B replied to the thread Oil filter / oil cooler replacement recommendations?.
    The Dorman was the most expensive one. I did see one for 200$+ My local Napa had the Dorman they wanted 300$+.
  • Anybodyhome
    Anybodyhome replied to the thread J8 booster talk.
    I've read the same as the ABS system needs to be inactive to bleed the individual calipers, and the system needs to be reactivated to...
  • Anybodyhome
    Anybodyhome reacted to WSS's post in the thread J8 booster talk with Like Like.
    started the project this evening. Got the clip off of the pedal arm, air compressor removed and the pcm/abs tray loosened up. Has...
  • tJKrider
    tJKrider reacted to JeepJeezy's post in the thread What did you do to your JK today? with Like Like.
    So we're still dealing with Fenway's seizures so I haven't had any trail time. But I did have time to aim the lights. These things are...
  • WSS
    WSS replied to the thread J8 booster talk.
    started the project this evening. Got the clip off of the pedal arm, air compressor removed and the pcm/abs tray loosened up. Has...
    • IMG_9894.jpeg
    • IMG_9893.jpeg
    • IMG_9895.jpeg
Show older items
Top Bottom