Stability control light comes on anytime I hit a bump

J

Jonbev2

New Member
Joined
Mar 31, 2021
Messages
2
Location
Tx
2015 Jeep Wrangler unlimited sport rhd stability control light comes on and stays anytime I hit a bump. The light goes off upon restart, doesn’t show any codes other than camshaft sensor. Had the sensor replaced, but still coming on, any ideas?
 
If you didn't use a OEM camshaft sensor that could be the problem, also sometimes you need to do a reset so the ECM can do a relearn.

On the stability control light are you referring to the lightning bolt light? If so is your steering wheel centered?
 
  • Like
Reactions: Ghstrydr
BLACKJKU said:
If you didn't use a OEM camshaft sensor that could be the problem, also sometimes you need to do a reset so the ECM can do a relearn.

On the stability control light are you referring to the lightning bolt light? If so is your steering wheel centered?
Click to expand...
How do you do a reset? Yes the steering wheel is centered.Mechanics I’ve talked to seem to think it is an engine issue, I think it is more of a drive ability issue(maybe steering or front end) but I’m definitely not a mechanic.
 
wranglerjkforum.net

How to Reset the ECU on a Jeep Wrangler JK

While there are folks that swear resetting your ECU does absolutely nothing, it's a common practice among automotive enthusiasts. The ECU (Electronic Control Module) "learns" your driving style and the parts in your ride by storing information in its memory, information that it gathers using a...
wranglerjkforum.net wranglerjkforum.net
 
Last edited:
Top Bottom