2016 jeep wrangler unlimited, 3.6, auto trans, 135,000 miles. When first start up, going from first to 2nd, it starts surging then jumps into 3rd. But after about 30 minutes of driving and get warm, its fine. Changed plugs,coils, injectors, lower and upper intake gaskets, pcv, maf, throttle body, and crankshaft position sensor. I did all of the relearn. Im stumped. My thought was maybe a vacuum leak, but checked all lines but thinking maybe trans filter and fluid change. Looks a little dark. Just bought it 4 months ago. Any help would be appreciated.
Hesitation/surging
- Thread starter Haywood365
- Start date
My first thought based on your description was trans related, not engine related. I would replace the trans fluid and see if that helps.
