Is there a way to add my e-locker switches to the factory dash panel where my traction control switch is.. 2012 JK sport.
Those switches are fixed on a printed circuit board (PCB) with a fixed number of pins (4) coming out of the back. To add your e-lockers you would need to purchase the Rubicon switch block with the different PCB and extra pins. I don’t know if the dealer will sell that separately to the console or you should try a wrecking yard, but they might also ask you buy the whole console.Is there a way to add my e-locker switches to the factory dash panel where my traction control switch is.. 2012 JK sport.
I realize these are ridiculously expensive but I picked up a used setup off a private seller on eBay for a good price. There arE also Chinese knockoffs available.
![]()
SourceLT - Jeep 2007-2008 Wrangler JK - 4x4 sPod
The SourceLT will save hours of wiring & installation time! It is a small, solid-state 6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No...www.4x4spod.com
I would try it but my CB is mounted up there.https://www.amazon.com/dp/B079JJNV38/?tag=jkforum-20
I looked at this on Amazon. There is a 6 switch version for 159. I'll say this, I tend to be a brand snob, I put NightForce scopes on my good rifles and buy Sig Sauer or Daniel Defense or Benelli.....or I don't buy.
On something like this.......I might give it a try, I'm sure the SPOD is good, but the 6 switch Voswitch on Amazon looks good and the reviews are 4.5 plus.
