2012 JK dies at stop, then stays in neutral upon restarting

chrs93

New Member
Joined
Jun 9, 2020
Messages
4
Location
Springfield Missouri
So my jk periodically will die at stop. I put in park and restart. starts right up. i put it back in drive and it seems to just stay in neutral. I then put back in park. Shut it off and restart and everything is normal. goes in to drive no problem. only seems to do it on hot days and when A/C is on. I hook up obd scanner no stored codes at all. not sure where to start.
 
Hey it's really late to respond probably but if someone else finds this thread with the same problem maybe this will help...
I had the same problem on my old Cadillac, It ended up being a bad crank position sensor. After a little bit of research it doesn't seem to bad to fix on wranglers- here's a few videos that hopefully help:
3.6L:
3.8L:
 
  • Wow
Reactions: Chris
I’m glad I saw this. Had the same thing happen to me today; Jeep stalled and threw code p0335 while hot out ( this was the second time this happened) after it cooled down this evening no stalling or codes or check engine light.
 
  • Like
Reactions: R0NAN_4x4 and Chris