Search results

Good morning..Well for all that have followed my Jeep situation it has been fixed took it to a auto shop it was found to be the brake switch which is located on the brake arm it had shorted out causing constant power..so glad it's fixed.

I think it is time. We're going to take it into a shop. I stopped and talked to the guy today and he's got a what you're talking about. But on a much bigger scale, hook up to that and see what is going on with it, we are tired of throwing money at it with different parts, and it's not solving...

Yes.it starts and moves forward and backward everything works it just will not shut off .driving us nuts.

So we checked the with a code reader and it threw a transfer case switch.along those lines. So that's when we replaced the transfer case switch, then when he did the code reader to clear everything again, because it once again would not shut off, after all the things we have replaced, then it...

Yes we have our own .and it's not showing any now that we replaced that last part but it won't start now either .

Okay, so on the 2010 Jeep Wrangler, JK that would not turn off with the Ignition, we have replaced the TI. P. M the starter, the Ignition switch the Ignition lock cylinder, and we are now doing the transfer case switch. Still, the same problem will not turn off with the key. We're getting tired...

Yes, the fuel pump does cycle when you just turn the key to the auxiliary position.And yes we remove the fuse for the fuel pump. Because the engine will not turn off with the key. Our next step, after all the other things we've done is to replace the Tumblr for the where the key goes in, we're...

Thank you. We will look into that tomorrow. And so far, when the key is turned off and out of the Ignition, all of the things are shut off, the only thing running is the engine. But hey, no I want everybody to keep throwing ideas at us because we're good, it's tough to figure out

So throw some ideas at us.. Any ideas would be great thank you

No with the key out the engine's still running, you cannot shift it into gear or anything. You have to turn the key into the on position. To move it

Thank you, Chris, for the ideas we did work through them last night. Unfortunately, none of those were the problem. We are leaning towards the key cylinder as being the problem, when my husband replace the ignition switch, when I would put the key in the Key cylinder it seemed harder to turn...

We have replaced the starter. The Ignition switch and the tipm module and the engines still will not shut off with the key. You turn the key off and remove and all the gages go off, but the engine is still running, and the key is not in the Ignition. What are their ideas? Can you guys throw at...