Search results

Those look like Fox 2.0 Performance Reservoir Adjustable shocks.

Damn! In 29 years of driving, this was my 1st windshield I had to replace.

Got the new windshield installed. Friends and family discount!

Thanks. I think I'll start with the 2 and if I need more, then I'll hook up my 3rd.

Sorry I missed this. I'm planning on an outside Renogy 100w solar panel mounted onto a Renogy 28" adjustable solar bracket. This will be mounted to my roof cross rails. The cables will be ran inside to the rear and into a Renogy Wanderer Li40 with a Renogy Bluetooth RJ12. I will have 100w ANL...

I don't have an oem Inverter in my Jeep.

I got mine at Harbour Freight YEARS ago!

I built a Renogy system for my home. Zero issues in 10 years. I'm actually looking to do a solar charge system for my Jeep. I'm tired of always plugging it in to trickle charge because my commute to work is so short. I've also been doing more overlanding extended weekend. This last trip it got...

Would this work for your bike rack setup? I have the same adapter when I'd run my basket and a bike rack for my daughter bike. Basket in the bottom and bike rack on the top. The only thing I had to do was run 1 of those anti rattle things for the bike rack. There was just too much play for my...

Bucket list for me!

I've bought u joints and had a bad cap on 1 already. Honestly it almost sounds like you might have a pebble stuck behind a brake pad or behind the dust shield. Been there too!

👆 this has happened to me before!

If memory serves me right, your starter has the bolts that thread into the housing to mount it? One bolt longer than the other? Some starters had a shim from the factory. Did you notice a shim with your old starter? Also, did you clean any gunk on the threads on the bolts? Lastly, did you...

Napa Auto can also color match your paint code and put it in a rattle can or cans for ya.

What are you looking to get out of the cover? I've had this in the back of mine for years. It's waterproof, items don't slide around on it, if it gets muddy from the dog, I can either take it out and hose it off or hose it off in the Jeep. When I'd hose it off in the Jeep, I do keep the front...

My t-stat is a 208. 2015 Willy's. I've heard of some people putting in a 180 and throwing a P0128 code.

Would this work for you, https://ironman4x4fab.com/products/hydro-assist-steering-skid

I also have winch and lights connected to these clamps. Zero issues. In my picture further up you can see my winch disconnect installed.

I got the A12's. With the positive cable, I cut a slit on the oem clamp that's around the end of the cable. I heated up that end and pried the oem clamp off. This will also separate your positive cable into 2 singles. The negative cable had plenty of room to just cut the oem clamp off at the oem...

So is the whole ball joint is still in the pitman arm? If so, did you remove the cotter pin and nut from the top of it and try a ball joint fork to get it out?