Aftermarket lights and switches

Black Bear Jeep (Dan44)

Black Bear Jeep (Dan44)

Member
Joined
Sep 6, 2024
Messages
26
Location
Athol, Idaho
Hello,
I am adding some aftermarket lights and I'm looking for ideas for switches / locations. I have a Sahara and have some empty locations near the Hazard Light Switch. Not keen on an A pillar clusters or overheads. Show me what you got, even if they are pillar mounts or overheads.
Thanks
 
  • Like
Reactions: tJKrider
I used this setup for my a pillar lights and light bar. No need for switches inside the Jeep.

Resized_20220914_194409_997625888439798.jpeg


Screenshot_20230821-154326_eBay_997652958002808.jpg
 
  • Like
Reactions: Artisanau and tJKrider
You said post what ya got…this is what I use S-Tech 6 switch panel. I really like it, no interference with your top, everything is fused/relayed and it is so easy to add components.

I don’t have a pic of the under hood module handy, but could get it if your interested.

IMG_0165.jpeg
 
  • Like
Reactions: AUBoggs, Speartip, JeepJeezy and 1 other person
1o1Proof said:
You said post what ya got…this is what I use S-Tech 6 switch panel. I really like it, no interference with your top, everything is fused/relayed and it is so easy to add components.

I don’t have a pic of the under hood module handy, but could get it if your interested.

View attachment 128223
Click to expand...


No need for under the hood. But Thank You for the picture. Do the wires go right or left out the switch cluster?
 
I'm using an S-Pod and it simplifies adding anything electric. Install the switch panel above the rear view mirror, run the wire harness inside the left A post and down to the distribution box under the hood. Anything electric connects to the box and the switches are then active.

https://www.4x4spod.com/?vid=137320
 
  • Like
Reactions: Speartip
Dan44 said:
But then I would have to keep up with a key-fob. Curious though, can you use more than one, are they selective or will one key-fob work all the lights?
Click to expand...

I only have 1 key fob and I have my a pillar and light bar wired together. I keep my key fob with my keys.
 
Dan44 said:
Hello,
I am adding some aftermarket lights and I'm looking for ideas for switches / locations. I have a Sahara and have some empty locations near the Hazard Light Switch. Not keen on an A pillar clusters or overheads. Show me what you got, even if they are pillar mounts or overheads.
Thanks
Click to expand...

1000007327.jpg

I also went with the 6 panel overhead. Mine got the volt Guage so I can keep an eye on things. Easy install and includes under hood relay box
 
  • Like
Reactions: AUBoggs, Speartip, Artisanau and 1 other person
1o1Proof said:
You said post what ya got…this is what I use S-Tech 6 switch panel. I really like it, no interference with your top, everything is fused/relayed and it is so easy to add components.

I don’t have a pic of the under hood module handy, but could get it if your interested.

View attachment 128223
Click to expand...

Me thinks the pod system either overhead or A pillar is most def the way to go .
Expansion doesn’t get any easier as the under hood module is so accessible .
 
  • Like
Reactions: 1o1Proof and Dirty Dog
Top Bottom