Then it's your lucky day. Here's one data point. Truth be told, it's actually pretty solid quite a ways up there. But obviously with that surface rust forming and the rust inching that way up it was only a matter of time before it got there and ate it all up.
The plan is to cut it out, get down to clean metal on the edges, then 3M panel bond with a 1" overlap. My weld technique is not good enough for me to try the old school way. Then I will seal up seams on the bottom and POR15 the underneath. Then I'll primer and paint the top.
The plan is to cut it out, get down to clean metal on the edges, then 3M panel bond with a 1" overlap. My weld technique is not good enough for me to try the old school way. Then I will seal up seams on the bottom and POR15 the underneath. Then I'll primer and paint the top.