Recent content by Viclava

  1. Viclava

    Help needed with bump steer (I think)

    What about it has you concerned? It is not loose. It is on level ground.
  2. Viclava

    Help needed with bump steer (I think)

    Rotated tires front to back and back to front, checked for loose wheel bearings, new Bilstein does not appear to be bad, jumped up and down on RF fender and steering wheel had a slight back and forth movement, but slight. Torqued drag link, tie rod, and all was tight. Went for test drive on...
  3. Viclava

    Help needed with bump steer (I think)

    Thanks for the responses! No, I have not tried that, but I definitely will. The shocks are brand new Bilstein 5100’s.
  4. Viclava

    Help needed with bump steer (I think)

    The sway bar end links are what came with kit I believe, and is actually sitting level. I specifically asked alignment tech and he said they are where they are suppose to be. Hmm, he claims they don’t do much anyway. Thought that was an odd thing to say frankly. Additionally, i have a...
  5. Viclava

    Help needed with bump steer (I think)

    Im running 35” tires @ 29 psi.
  6. Viclava

    Help needed with bump steer (I think)

    I have a 16 Rubicon with a 3” fabtech spring lift (I inherited) and just had steering inspected. All stock with exception of lower control arm bracket drop and RC adjustable track bars front and rear with rear trackbar relocation bracket. I go over a bump with right tire and wheel shakes back...
  7. Viclava

    Advice needed on a ignition kit

    Looking for advice on a good ignition kit for my 16 Rubicon Unlimited. Coil and iridium plug kit. Bought a Chineseum kit by AP Premium ignition coil snd iridium plug kit, but very hesitant yo use it now. Thanks
  8. Viclava

    Front/rear sway bar end link question

    In my quest to fine tune my steering/suspension on my 16 JKU, i purchased a set of front and rear adjustable sway bar end links. My rear is currently angled down (3” Lift) and front is almost 90 degrees. I have aftermarket rear bump stops due to lift, and noticed that the top side of end links...
  9. Viclava

    Need suspension/steering advice 16 JKU Rubicon HR

    What is “The chalk test”?
  10. Viclava

    Need suspension/steering advice 16 JKU Rubicon HR

    I just purchased this Jeep a month ago. I just got back in from out of state and had some time to get under my Jeep and look at things. I noticed that I have a 3” Fabtech lift. Springs, shocks, and that’s all that I can tell it has that’s not OEM. It came with 35” X 12.5” X 17” Maxis Razr tires...
  11. Viclava

    Installed roof rack and RTT

    If you were also asking about the rack, it’s this one off Amazon, which is exact same thing as the Smittybilt . Probably made in same factory, but over $100 less. Trail FX J029T Roof Rack
  12. Viclava

    Installed roof rack and RTT

    I went with this, after a buddy of mine had been using one of there tents for a while, and really likes it. They are identical RTT’s out there that are $1k more at least. https://www.trust-made.com/Trustmade-Triangle-Aluminium-Black-Hard-Shell-Beige-Rooftop-Tent-Scout-MAX-Series-pd45441380.html
  13. Viclava

    Installed roof rack and RTT

  14. Viclava

    Washington WTB air cleaner box for my 2016 jk.

    WTB air cleaner box for my 2016 JK. One of the metal tab mounts broke on mine. Looking for someone who has an aftermarket who doesn’t need their stock air cleaner box anymore. Help please! Thanks in advance, Scott