Latest activity

  • W
    Wranglerfix reacted to pc1p's post in the thread 2010 3.8 P0206 with Like Like.
    I agree with you, unless you noticed some serious corrosion, it's unlikely that just that wire from that splice is causing you grief. If...
  • W
    Wranglerfix replied to the thread 2010 3.8 P0206.
    Yes, a corroded injector or connector can cause your p0206 code. We can test and hopefully repair your pcm if you would like to send it...
  • W
    Wranglerfix reacted to dbsnyder97's post in the thread 2010 3.8 P0206 with Like Like.
    2010 Wrangler Sport 3.8 had a misfire on cylinder 6. Replaced coil, wires, and plugs and still had misfire. Figured I’d check the...
  • WSS
    Ya, hindsight says the emissions tests were not complete. No one would say it though. Not even the ref. He said I had to drive it to...
  • WSS
    interesting, typically to pass smog in SoCal with a OBDII system, you just have to have no codes and all of the smog systems checked. To...
  • JeepJeezy
    JeepJeezy replied to the thread OEM Headlights.
    Do your lights do this at random or do they turn on when you're approaching or in close proximity your Jeep?
  • JeepJeezy
    JeepJeezy reacted to Moosejaw's post in the thread OEM Headlights with Like Like.
    I have a 2011 Jeep wrangler jk and installed a new/refurbished pcm a month ago and over the last several days I’ve noticed the...
  • pc1p
    pc1p replied to the thread 2010 3.8 P0206.
    I agree with you, unless you noticed some serious corrosion, it's unlikely that just that wire from that splice is causing you grief. If...
  • pc1p
    pc1p reacted to dbsnyder97's post in the thread 2010 3.8 P0206 with Like Like.
    Yeah that’s how the circuit works. Power is supplied by a brown white wire off the ASD relay and each injector is spliced into that...
  • D
    dbsnyder97 replied to the thread 2010 3.8 P0206.
    Yeah that’s how the circuit works. Power is supplied by a brown white wire off the ASD relay and each injector is spliced into that...
  • pc1p
    pc1p replied to the thread 2010 3.8 P0206.
    Unless something has changed, historically, the ASD output provides 12v+ to the coils and injectors, and the ECM controls the ground...
  • D
    dbsnyder97 replied to the thread 2010 3.8 P0206.
    Thank you for the reply! Do you have any info on the procedure to check the injector driver output directly off the pcm? The only bit...
  • K
    interesting, typically to pass smog in SoCal with a OBDII system, you just have to have no codes and all of the smog systems checked. To...
  • Chris
    Chris replied to the thread 2010 3.8 P0206.
    Given the circumstances, it is possible that the corroded injector and the broken pin could have caused enough resistance to damage the...
  • D
    2010 Wrangler Sport 3.8 had a misfire on cylinder 6. Replaced coil, wires, and plugs and still had misfire. Figured I’d check the...