Latest activity
-
pc1p replied to the thread Generational JKUR.I don't believe it's the spring itself failing, but rather the "clutch" assembly inside that wears out and loosens, causing the cable to... -
TTRevs replied to the thread Generational JKUR.Do the springs just lose tension over time? I saw the handle assembly is still for sale and not as expensive as i would have guessed...
-
If you had this hardtop all you would need is a bottle of Windex. 😂
-
pc1p replied to the thread Aftermarket Backup Camera for 2015 JK (2025 version).Hmmm... now I'm curious as to why there would be key-on constant power in the side taillight.
-
pc1p replied to the thread BF Goodrich K03.Not me, but I'm curious to get your thoughts, especially since you're up in BC. I'm considering getting a set of 39"s for next year's...
-
pc1p replied to the thread Generational JKUR.Ebrake handle/clutch is a known pain in the ass... the Mopar replacement is relatively quick and painless to install. Don't remove the...
-
TTRevs replied to the thread Generational JKUR.
-
-
TTRevs replied to the thread Generational JKUR.It seems part of the reason these get loose is that there is a clock spring in the handle assembly that is supposed to take up slack in...
-
TTRevs replied to the thread Generational JKUR.Since the MTF change took so long, I didn’t have time to track down the parasitic drain on the door lock circuit But a more pressing...
-
-
TIf it's any consolation, changing the ATF on a JK is equally as annoying... there are a handful of pan bolts completely blocked by the...
-
pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).The shifter and e-brake floor pans came back from powdercoat. The first step was to glue the tub seal back into the bottom. I think the...
-
-
pc1p replied to the thread Generational JKUR.If it's any consolation, changing the ATF on a JK is equally as annoying... there are a handful of pan bolts completely blocked by the...
-
There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I...
-
There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I... -
TTRevs replied to the thread Generational JKUR.There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I...
-
