Latest activity

What's new Featured content New Posts Latest activity
  • pc1p
    pc1p replied to the thread Aftermarket Backup Camera for 2015 JK (2025 version).
    Hmmm... now I'm curious as to why there would be key-on constant power in the side taillight.
  • pc1p
    pc1p replied to the thread BF Goodrich K03.
    Not me, but I'm curious to get your thoughts, especially since you're up in BC. I'm considering getting a set of 39"s for next year's...
  • pc1p
    pc1p replied to the thread Generational JKUR.
    Ebrake handle/clutch is a known pain in the ass... the Mopar replacement is relatively quick and painless to install. Don't remove the...
  • T
    TRevs replied to the thread Generational JKUR.
    • IMG_6891.jpeg
  • T
    TRevs replied to the thread Generational JKUR.
    It seems part of the reason these get loose is that there is a clock spring in the handle assembly that is supposed to take up slack in...
  • T
    TRevs replied to the thread Generational JKUR.
    Since the MTF change took so long, I didn’t have time to track down the parasitic drain on the door lock circuit But a more pressing...
    • IMG_6881.jpeg
    • IMG_6882.jpeg
    • IMG_6883.jpeg
  • T
    TRevs reacted to pc1p's post in the thread Generational JKUR with Like Like.
    If it's any consolation, changing the ATF on a JK is equally as annoying... there are a handful of pan bolts completely blocked by the...
  • pc1p
    pc1p replied to the thread 2008 JKU "Argenta" Build Thread (plus a 2010 Islander side project).
    The shifter and e-brake floor pans came back from powdercoat. The first step was to glue the tub seal back into the bottom. I think the...
    • IMG_7066.JPG
    • IMG_7065.JPG
    • IMG_7064.JPG
    • IMG_7060.JPG
    • IMG_7059.JPG
    • IMG_7058.JPG
    • IMG_7050.JPG
    • IMG_7049.JPG
    • IMG_7046.JPG
    • IMG_7045.JPG
    • IMG_7041.JPG
  • pc1p
    pc1p replied to the thread Generational JKUR.
    If it's any consolation, changing the ATF on a JK is equally as annoying... there are a handful of pan bolts completely blocked by the...
  • pc1p
    pc1p reacted to TRevs's post in the thread Generational JKUR with Wow Wow.
    There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I...
  • tJKrider
    tJKrider reacted to TRevs's post in the thread Generational JKUR with Wow Wow.
    There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I...
  • T
    TRevs replied to the thread Generational JKUR.
    There are videos about cutting the head off a 17mm hex socket to slide between the exhaust pipe and the transmission l; unfortunately I...
    • IMG_6887.jpeg
    • IMG_6889.jpeg
  • T
    TRevs replied to the thread Generational JKUR.
    Since the jeep is new to us, and apart from oil changes I don’t have any record of prior fluid maintenance, I wanted to change all the...
  • tJKrider
    tJKrider reacted to pc1p's post in the thread Heater core back-flush fixed heat on 2011 with Like Like.
    I went ahead and ordered the Lisle one from Summit... should be here mid week. I'm going to try to pick up some clear hose (just to...
  • pc1p
    pc1p reacted to tJKrider's post in the thread Heater core back-flush fixed heat on 2011 with Like Like.
    Good job @Hogges ! Sometimes it pays to try to simple fix first!!
Show older items
Top Bottom
Back