Latest activity
-
BLACKJKU replied to the thread Cooling Issue and Leak.Did the cooling system get really low and maybe trapped a air pocket in the block? Maybe try jacking the front of the Jeep up about 6"... -
Tturbobuick replied to the thread Cooling Issue and Leak.This is with the AC both on and off. Cooling fan is kicking into high and running just fine. Radiator is newish (2 years old) and fins...
-
If you'd have mentioned that you had a locker in the front that would have been easier to guess that it could have been the friction... -
BLACKJKU replied to the thread Axle chatter.If you'd have mentioned that you had a locker in the front that would have been easier to guess that it could have been the friction...
-
BLACKJKU replied to the thread Cooling Issue and Leak.Is this with the AC on? Are your cooling fans working and kicking into high speed? Is your radiator fins clean? Do you have a big...
-
Kkewljeepclub replied to the thread Axle chatter.Awesome! thank you
-
BLACKJKU replied to the thread Axle chatter.You might have to add a little more to it if possible.
-
tJKrider replied to the thread Cooling Issue and Leak.Welcome! There are quite a few knowledgeable 3.8 owners on here that should be able to point you in the right direction.
-
Welcome to the forum! I do not have the 3.8 but I do know the temp range is from 195-230. When you hit the 230 mark, is it sitting idle...
-
Kkewljeepclub replied to the thread Axle chatter.Yes that is what I have and added about half a bottle in last night. seems better but still there. Does it take time for that to go...
-
BLACKJKU replied to the thread Axle chatter.Do you have a Rubicon with the locker in the front, if so yes it needs to have a friction additive added to the gear oil.
-
Kkewljeepclub replied to the thread Axle chatter.Yes it looks like they did and They are torqued done. I added some additive to the fluid and it has seemed to help but not all the way...
-
Tturbobuick replied to the thread Cooling Issue and Leak.This was sitting idle in the shop with the scan tool showing an intake air temperature of 92 degrees. Thanks for the reply! ----Jer
-
JeepJeezy replied to the thread Cooling Issue and Leak.Welcome to the forum! I do not have the 3.8 but I do know the temp range is from 195-230. When you hit the 230 mark, is it sitting idle... -
First of all thanks for having me on the forum! I have a 2010 Sahara with the 3.8L engine and 201k miles. It was starting to get warm...
