I needed to replace my left dash multifunction switch (turn signals, head lights, ect..) Ordered part and watched a video and did the job. Opps that little screw that hold it on dropped and never cam out from the dash area. Any clue on the screw size?? only about 1/4 inch long . Switch is working great and turn signals turn off but would like to put the screw in to make it complete. 2017 JKU Sport. The screw is next to green wire and white spot on picture. Thanks
Multifunction /switch
- Thread starter Stormydog
- Start date
Take the other screw out. Go to your favorite hardware store. Hand it to someone who works there and say "I need one of these".
The screw dropped while putting it back in and has not dropped out from under the dash...so no screw...thats my problem.
There are two screws holding that switch in. Problem solved.
No their is only 1, the switch slides in , has 2 wire clips and 1 screw, taken it out and lost the screw in the dash putting it back in. Here is the video...
Acxman
JK Enthusiast
The other multi switch, on the other side, (the washer/ wiper) switch has the same screw. take that one to the hardware store and match it up.
My bad. I changed one of ours recently and I could have sworn I remembered taking out two screws.