So I am trying to figure out if I have a hub issue or a shock issue.
Background info. I have a 2016 Rubicon Unlimited Hard Rock, manual trans. it has 38,000 mile on it. I was stupid and have only rotated the tires a couple times...
Now the front tires, left a bit more than the right has cupping/scalloping wear on the treads. (one tread low, then one high, than middle, than low, etc.) Rear tires are fine.
I had started noticing a little re vibration recently and then the other day my traction control and ABS light came on.
So I’m pretty sure whatever is going on has stemmed from a lack of proper tire rotation, but can’t tell if I need to replace the hubs or the shocks in addition to the tires and speed sensor. I’d think 38,000mi would be too soon for shocks to be bad, but the cupping seems like more of a shock issue than a hub issue.
Thoughts?
Background info. I have a 2016 Rubicon Unlimited Hard Rock, manual trans. it has 38,000 mile on it. I was stupid and have only rotated the tires a couple times...
Now the front tires, left a bit more than the right has cupping/scalloping wear on the treads. (one tread low, then one high, than middle, than low, etc.) Rear tires are fine.
I had started noticing a little re vibration recently and then the other day my traction control and ABS light came on.
So I’m pretty sure whatever is going on has stemmed from a lack of proper tire rotation, but can’t tell if I need to replace the hubs or the shocks in addition to the tires and speed sensor. I’d think 38,000mi would be too soon for shocks to be bad, but the cupping seems like more of a shock issue than a hub issue.
Thoughts?