Search results

Yes it's not a good idea to reuse a used gasket.

They must be a special molded hose for that price.

If they are just ordinary heater hose they don't even cost near that much, probably about $20 dollars or so.

I didn't know that the 2017 heater hoses were gold plated, I don't have a JK that new to know what they look like but you need to find another Mechanic I think.

Try doing a ECM reset.

My Aftermarket bumpers were bolted on just like the Factory ones. Having lockers in the front and rear would be the best for snow, but if you have a auto trans not sure you can have them.

Not sure what your meaning by noisy, mine is really quiet compared to my 12v Cummins.

Pepper

If I was out in the garage working and she couldn't find me in the house she would make my wife take her to the garage so that she could see if I was in there and OK.

She always had to know where I was at, just like a shadow following me around.

I just got home from having my little girl put to sleep, she would have been 17 in December.

Since it stops when you apply the brakes it's probably in the pads, most have a wear piece on them that makes a noise when the pads get low.

Stone in the brake pad, pads are needing to be replaced, wheel bearing is bad.

Thanks for the update, hopefully it's fixed for good.

Tons of info on it if you Google it, but you just draw a chalk line across the tread and drive back and forth across a cement or asphalt drive and then look to see how much chalk is missing. If there's still chalk on the outsides of the tires then to much air, if all the chalk is missing it...

Could be a caliper or the rubber hose, the hoses will collapse on the inside and restrict the flow of brake fluid back to the master cyl. After you go for a drive and your wheel is hot hurry up and jack it up and see if it turns.

Do the chalk test and you'll get it right.

Like JeepJeezy said if you have play in the steering wheel then the traction control thinks the Jeep is like fishtailing and it has the ESP do it's thing. Test the steering with the engine not running by having someone turn the wheel back and forth just enough to when the steering starts to get...

Do you have some play in the steering wheel that your moving it back and forth to keep going straight?

Is your steering wheel centered when going straight down the road?