Search results

Been posting about this alot lately but I've found this hard to find information on in particular with my Era of jeep which is a 2008. I need to test #5 injector circuit with a noid light but how do I turn over the engine to test the connector with the Manifold cover off? What do I need to...

Ok I think I know where it is now. Right on the coil pack on the side. Now when I unplug that and crank over the car with a noid light in the plug for the #5 I should be able to get to see if it lights up without starting the car with the manifold off. Because I feel like I wouldn't want to do...

Clip*

Sorry I'm guessing it's the clip hat connects to the coil pack?

Hey everyone. Git a pretty simple question. Where is my electrical connector on my jeep jk 2008? I'm trying to see if I can use a noid light to test my cylinder #5 to see if it's getting power. I have to take the manifold cover off so I can't start the engine. Thanks in advance. From the...

No avail. Started her up got the engine warm drove a bit things were good. Turned her off waited a few min then started her again and codes came back on. Looks like om gonna have to replace the injectors. Seems like it's the last thing to do

I still was getting p0205 and p0305 error codes but when I took off the manifold cover I discovered that at some point the wires were taped and there is a slight nick on the wire. Wondering if I should just tape her up again and keep the separate or try to replace and replace the wire which I have

This was my freeze frame from today. Any clues from this info?

Changed the rest of the spark plugs today. The driver side was such a breeze compared to passenger side. It is essential to removed the tire and wheel well cover to access 5 and 3. You'll drive yourself nuts otherwise. That said. I thought it fixed my p0205 p0305 woes but to no avail...

I got the 3 passenger side ones in today. I should have gotten the gapper but they looked ok, gonna go get one for the last 3 and cross my fingers. I gotta say the zip tie pull the wire through method was AMAZING. the whole process went relatively smoothly. Those 3 on the passenger side are...

Ok Better safe than sorry I will take them back. Thanks alot for the heads up

they re bosch double platinum. is that not right? I got them at an autoparts store that said it fit the wrangler

Thay is an awesome tip thank you! I will do that. Today I managed to remove #5 and #3 briefly and popped them back in loosely for now as I realized the boots were not pulling off cleanly so will need new wires. Will start with 5 then 3 and continue on so I don't mix them up too. I was...

Really appreciate that tip. I bought it, hopefully should be here tomorrow to continue the work. Really appreciate the help and tips you've all been giving me lately. It's given alot of motivation and second and third lives into this jeep haha.

anybody got tips on the best way to remove the boots to get at the spark plugs. I'm trying to get at the infamous #5 but just removing them in general is proving tough. Any tips will be great appreciated. Trying not to rip wires and such

I'd like to be able to test the spray of the fuel injectors themselves and maybe even the new ones I get. What would you suggest as a way to do it? I've seen a bunch of videos with one guy doing it with a 9v battery

194,000. A few years back one of the injectors went and at the time I took it to a mechanic who said it might be a good idea to replace them all but I could only afford to do one.

I managed to get the top off. No mouse evidence of chewing that I can see. I need to look up the cylinder order and see which one is number 5. It was relatively straight forward to take off except that one bokt in the back drivers side. Very hard to reach

oh boy, this came up just now after it was running fine this morning. I feel like I should check the harness to make sure a mouse didn't chew through it? Is the harness under the the cap on top of the engine?

yeah its been working for a bit now, but Id rather just re do it properly. more car practice as I see it. You think the above parts I linked would work?