Search results

Got the Dorman Clockspring installed, as well as the new turn signal, and although it no longer clicks when turning the wheel, and my turn signal actually stays locked during a turn, it did not fix the error with the ABS/Christmas lights. I'm about 98% sure it's the ABS module at this point in...

That's basically what I'm seeing as well... I almost did it when I fixed the horn switch, but wanted to confirm that the switch was indeed the issue. I should have done it anyways. *Laughs in LJ ECM issues* Should arrive tomorrow if I can trust the UPS tracking #... with any luck, I'll have...

Eh, it's a 17 year old Jeep with 211,000 miles... bound to have some issues :)

It's been a minute since I got to work on the Jeep. Since getting back from our trip and through the holidays, it's just been busy... I did run into a slight issue with the Jeep. During one of the snow storms, I was coming up my steep and freshly covered driveway. It caused the traction control...

As I see it, most of the guys I've seen running 40"s, heck even 37"s (and in some cases 35"s!!!) aren't doing trails hard enough to warrant 37"s (or 40"s), and by extension, aren't doing trails hard enough to damage axles/housings. On the other hand, there are plenty of examples of guys...

If you're not changing parts you've already changed 3 times, are you really building a Jeep??? lol - seems to be how I build mine too, even with good planning! :ROFLMAO:

Picked up a set of lightly used MetalCloak control arms - figured I’d have a spare set that I could keep ready to go, then swap out as needed during the recommended yearly maintenance and greasing… The first arm I took apart gave me fits - stripping one of the joints: I literally had to stand...

Getting back into the swing of things post vacation… Finally - FINALLY - got all the welding done on the Artec truss and brackets. I always get self-conscious posting my welds, but then I remember that these are the welds posted on Artec’s page… 😂🤣 Next up: throwing some paint on the...

It’s all about the design. Most cast-iron blocks do best in the 195-205° range. Aluminum blocks, aluminum heads, phenolic intakes, etc. do add some variables to that, but generally, all gas burning engines typically operate in a ~20° range of each other (note that water jacket temps aren’t...

Why "should it be" 180°? Engines are designed to run at a particular temperature, balancing latent heat, compression, efficiency, etc. OEM is 203° and is what I would stick with. Lower temperature thermostats only regulate the MINIMUM operating temperature, not the maximum anyways.

Found them after all… Apparently these are called "Super Jeeps", even if they aren't "Jeeps". Some other cool Icelandic rigs and just general cool trucks during my visit: I need to do some reading up on wheeling up there. Some things are a little off from what I was expecting. For...

Well that answers the question of “what would I drive if I moved to Iceland?”… Lots of cool rigs here in Iceland, but the one I’m most jealous of are the diesel Land Cruisers: Not many Jeeps here. In fact I’ve only seen one, a JK Rubi on stock tires and wheels. There is a Suzuki Jimmy, what...

Have a build thread?

The last of the parts I've been waiting for have arrived... I'll get to regear the 14B as soon as I'm done with the axle brackets. I ended up going with the Richmond Powertrax Grip Pro. It's comparable to the TrueTrac, which I've used plenty over the years. There was a decent price savings...

Had a quiet afternoon with a few cancelled meetings, so I decided to get the truss at least tacked in place to make me feel better… I set the pinion angle to 7° based on seeing nearly every person say that this was about perfect for a 14B on 3.5-4.5” springs. From there, I leveled the the...

I was just having this conversation with a friend... "snow driving" means a lot of different things to a lot of different people. It also means different things to the same person, depending on circumstances. True "snow tires" are ones with specific sipping and compounds for use in the snow and...

Glad you figured it out… a reminder, the head rests fold back when the seat is laid down. I’ve seen some people (cough cough my daughter) try to make them fold forward as they put the seat down. It doesn’t work lol…

The studs I ordered finally arrived, two days late but just ahead of the storm. As you can see, the 610-194’s most closely match the original M14 wheel studs, but in 9/16” thread: The 610-359, which many on Pirate4x4 said was their stud of choice, would appear to work as well, but is really...

Test fitting the Artec truss and brackets... From everything I've seen, plus commonsense, and confirmed by Artec, it seems the best way to do this is to center the Apex truss over the center chunk for best fit, tack in place on all corners, then burn in deep. At that point, it seems that it's...

https://www.amazon.com/dp/B0BY34ZS22?tag=jkforum-20 I used these recently. They're nicely made and offer lots of expandability.