Search results

How heavy is your spare, and would you mind posting a few pics of the failure and how it latches, etc.?

eBay is your friend on this one.

You’ll have to replace the entire light housing… Or plan on soldering some wire.

Not sure which light you need parts for (front or rear), but complete assemblies for either are about $40 on ebay. I don't know where to get the internal components.

Cheaper than a whole Jeep!

For "extra connections", these clamps work great because the cables are attached using lug-type terminals and they can be arranged on the clamp... And I chose to go with the marine version on the new battery that includes the accessory terminals.

Replace the factory battery clamps.

I had a set of the clamps w/ multiple taps and found that they were not as good as old school version. I am now running these on the original cables. https://www.amazon.com/gp/product/B09DKZRYZK/?tag=jkforum-20

I recently used some of these and was very impressed. https://www.amazon.com/gp/aw/d/B08F46WKCZ/?tag=jkforum-20

You missed my point. Yes, PC is different from paint, but most aftermarket manufacturers apply too thin of a coat of it, and it doesn't last... especially on edges, corners, seams, etc. Hence, buying a set of metal flares that have shitty PC on them isn't really an improvement over the...

Except that most metal flares would be best served with a fresh top coat over how they come before installation... so the OP would be back to square one; flares that need to be painted! :ROFLMAO:

Yes, it's our '03. I found the end caps (front & rear) on ebay about 8-9 years ago.

This is the paint: https://www.homedepot.com/p/Rust-Oleum-Stops-Rust-12-oz-Textured-Metallic-Galaxy-Protective-Spray-Paint-252303/202531398 This is the rear bumper and the splash guards: (Dirt not included) I’ll probably get a coat of this on the mirror heads and the window trim panels too…...

Nothing can ‘restore’ the original color except new plastic, but I found a textured, black, spray paint at Home Depot that I used on the TJ splash guards, front bumper, running boards, etc. as well as several accessories/parts on my Harley and I’ve been very impressed with the way it retains the...

I bought a fairly inexpensive dual-out, 'sport' muffler for our 2015. It wasn't that bad when new, but nearly a year into it, it has increased in volume and aggravation. Next will be a single, that more closely matches the original.

You got me thinking about making similar decals for our travels.

This may actually be a blessing in disguise.

I replaced our TIPM through these guys: https://goecm.com/ Works as intended. No issues & no complaints.

You beat me to it! :ROFLMAO: OP, Before you replace them, give them a solid twist to see if they are actually tight on the post, or just tight on the clamp.

Beautiful rig @Dirty Dog ! Does that sliding top eliminate the freedom panels and make the entire top one piece (vs 3 pieces w/ freedom panels)?