Novak Conversions Jeep Wrangler JK radiators

Recommended product to restore black trim and fender flares

I

iamslotman

New Member
Joined
Nov 22, 2022
Messages
1
Location
Bayport NY
My wife drives a 2010 Wrangler Islander and I am hoping to restore the black (now dull gray) fenders and trim. Can anyone recommend a product that will last the longest? thanks and Happy Holidays all
 
  • Like
Reactions: BigAL07
I just did a facelift on our '03 TJ. I had done this to the speaker pods last year and had debated using it on the 'exterior' plastic. I was concerned that it would peel, flake, fade, and generally look worse than before I did anything & that was holding me back.
But a year + into the rework on the usually exposed speaker pods convinced me to give it a try...

Believe it or not, Dupli-Color Vinyl & Fabric paint.
Spray can that you can get at your local auto parts shop.

Be sure to clean and possibly even sand and/or prime the fenders first, but a few good coats of this paint and the side steps, lower fender trim, front bumper filler, & front bumperettes all look NEW.

I'm even thinking about a coat or two on the mirrors now.
1671842380380.png
 
  • Like
Reactions: BigAL07
I've tried most of the products mentioned in this thread and still not happy with the results 🙃 I want to remove and paint, but am afraid of breaking off the clips holding the fender (rear) on. Is there a safe way off removing them or will I have to buy new? I've got a clip remover. The plastic clips appear to be brittle

1730650109740766830396777543814.jpg
 
Acxman said:
I haven’t found anything that lasts !
Click to expand...

Nothing can ‘restore’ the original color except new plastic, but I found a textured, black, spray paint at Home Depot that I used on the TJ splash guards, front bumper, running boards, etc. as well as several accessories/parts on my Harley and I’ve been very impressed with the way it retains the dark color and the adherence to both metal and plastic.
 
  • Like
Reactions: tJKrider
WestCoastDan said:
Nothing can ‘restore’ the original color except new plastic, but I found a textured, black, spray paint at Home Depot that I used on the TJ splash guards, front bumper, running boards, etc. as well as several accessories/parts on my Harley and I’ve been very impressed with the way it retains the dark color and the adherence to both metal and plastic.
Click to expand...

Can you post a link to the exact product you used please?
 
  • Like
Reactions: WestCoastDan
WestCoastDan said:
Yes, it's our '03.
I found the end caps (front & rear) on ebay about 8-9 years ago.
Click to expand...

Thanks, I like those. I removed the OEM ends, but didn’t like the look so put them back on. Now they both are bent, dented etc. from rocks. Looking for a way to close off the ends.
 
Dlcain said:
I've tried most of the products mentioned in this thread and still not happy with the results 🙃 I want to remove and paint, but am afraid of breaking off the clips holding the fender (rear) on. Is there a safe way off removing them or will I have to buy new? I've got a clip remover. The plastic clips appear to be brittle

View attachment 128414
Click to expand...

https://www.amazon.com/Rexka-Moulding-68039280-AA-Wrangler-Unlimited/dp/B078RPDD2W/?tag=jkforum-20

$6.99 on Amazon for 25 pieces.
 
Novak Conversions Jeep Wrangler JK radiators
Top Bottom