looking for inner fender that are easy to install along with mid width flares

J

Jack102

New Member
Joined
Jan 15, 2024
Messages
10
Location
North Jersey
Hey all, just wanted to see if you guys have any opinions on certain inner fenders/flares that I should install on my Wrangler. I would like to not have to drill anything if possible looking for some simple bolt on install same with the flares. I have 35x12.5 inch tires so would also need to make sure they wouldn't rub. Look forward to hearing your thoughts.
 
Last edited:
  • Like
Reactions: vaffanculo
My experience is limited to my 2016 JKU with 3.5" lift and 35s. I swapped flares and liners out for the pictured ones. In my defense, I did wrench for a living and didn't have one hole to drill. I did install rivnuts in all the holes to really simplify the install. No trying to get a wrench on a blind nut makes it very easy to pull them when needed. They DO NOT rub at full flex.

Wasn't sure I'd like the flare's running lights, but they are a godsend in the pitch dark. They are wired direct to the front and rear running light harness.

Flares and liners are an Amazon buy.

https://www.amazon.com/dp/B08QVCQBC6?tag=jkforum-20 are the liners

https://www.amazon.com/dp/B07RTN38SF?tag=jkforum-20 are the flares

IMG_0957.jpeg
 
Last edited:
  • Like
Reactions: Jack102
They all pretty much bolt up like stock, lift has nothing to do with it. Find a style you like and run with it.
 
Jack102 said:
Hey all, just wanted to see if you guys have any opinions on certain inner fenders/flares that I should install on my Wrangler. I would like to not have to drill anything if possible looking for some simple bolt on install same with the flares. I have 35x12.5 inch tires so would also need to make sure they wouldn't rub. Look forward to hearing your thoughts.
Click to expand...
Hey jack good morning so I have a 2008 j/k and didn't want too spend 400 bucks for four new half fenders so I went on you tube and made them myself basically a oem fender is what they start with when they make the cuts ..so make a chalk line on your fenders how wide and the curvature you want them get a fine tooth jig saw and get too work on your new look I did it with my 08 j/k

20240209_132811.jpg


20240209_132846.jpg


Screenshot_20240207-220644_Photos.jpg
 
  • Like
Reactions: Jack102 and BigAL07
Here's some better pictures plus the wire that you will unplug from the side mount lights are a quick connection if you ever want to connect rock crawler lights

20240209_132836.jpg


20240209_132822.jpg


20200531_122511~2.jpg
 
Top Bottom