LED Headlight which way is up?

Gary

New Member
Joined
Nov 17, 2022
Messages
23
Location
Stanley, Idaho
I have the Chinese version of Truck Lites..NVL-HL-002. I think they might be upside down. No Detent for Locating the top. Does anyone know if the Headlight should have the Large half on the top or on the bottom???
NUVISION LED.jpg
way is
 
Plenty of YouTube helps to align your headlights.
The best method I found was a combination of using my garage door and masking tape to mark where the beams were hitting, then going on the road and trying them, adjusting , driving, adjusting... you get the point.
 
Plenty of YouTube helps to align your headlights.
The best method I found was a combination of using my garage door and masking tape to mark where the beams were hitting, then going on the road and trying them, adjusting , driving, adjusting... you get the point.
I go to Walmart after dark. Drive around by the loading docks. There's plenty of room to measure your distance from the wall and mark your beam targets.
 
Larger portion is top.
My high beam is at the bottom . PO owner had installed other head lights this way as well. I’ve got them aimed correctly , no DOT or UP printed into lenses .
IDK maybe mine are installed upside down ? They work really well in this configuration . So not going to fix what isn’t broken . Doesn’t seem to be a set standard for LED’s
 
  • Like
Reactions: JeepJeezy
My high beam is at the bottom . PO owner had installed other head lights this way as well. I’ve got them aimed correctly , no DOT or UP printed into lenses .
IDK maybe mine are installed upside down ? They work really well in this configuration . So not going to fix what isn’t broken . Doesn’t seem to be a set standard for LED’s
My high beam is also at the bottom. PO had them installed at the dealership. Mine are aimed perfectly too.
 
  • Like
Reactions: mrjp and Speartip