Recent content by wrangin

Improperly installed or poor quality cam bearings can cause low oil pressure. 192.168.100.1 192.168.1.1

On some Uconnect models, you can perform a reset by pressing and holding the "Volume" and "Tuner" (or "Seek") buttons simultaneously for 10-15 seconds until the screen turns off and then back on. This resets the system to factory settings, which may fix audio bugs. snaptube vidmate

I had a similar problem on my JK — it was the rear outlet seal of the transfer that was leaking. No need to put everything down, you can often change the seal with the box in place. Also check the crankcase, sometimes a small shock can cause a crack. A good cleaning before inspection helps to...

Hi Sarah, sorry for all your hassle, it sounds super frustrating. Since the problem comes back even after several replacements, I really think it's a wiring or ground problem somewhere. Maybe a good independent auto electrician would find what the dealer doesn't see. Cheer up, you've already...

I replaced mine with a Bestop Supertop NX and I'm super happy with it.Good quality, easy to install, and it holds up well over time.It's not the cheapest, but clearly a good investment.Otherwise Rampage has decent options if you have a tighter budget.

Code P0128 means that the engine is failing to reach optimum operating temperature within a reasonable time. Tutuapp

If you agreed to $250 CAD for a one-step modification and he started cutting out a lot of extra pieces, that seems like a departure from the original agreement. Mini Militia App Lock

NGK and Denso are both reliable options for O2 sensors. Many people prefer Denso for Toyota and Honda, while NGK works great for most vehicles too. Just make sure it’s the correct part number for your car.