pc1p's latest activity
-
Thanks from a Western Pa Yinzer! -
pc1p replied to the thread Anyone ever use this service?.Yup, that's essentially what it comes down to: pay a little for a one time (hopefully) service, or go with the more expensive options...
-
I have a 2016 JKU. I also have JScan but it can’t do the fan mods. A HP tuner would be expensive and I believe I would still need to...
-
pc1p replied to the thread JKU Hemi Swap - Reference Guide & Swap Info.8HP70 Swap - Vent Line Option Sometimes finding a simple, OEM option is nice, even for just a vent hose... The vent nipple at the top...
-
-
pc1p replied to the thread Hellcat powered JKU.Seems clean and tastefully built... Compared to the cost of a new 392 JLU, it offers some advantages. If you could get this for...
-
pc1p replied to the thread Hello from Pennsylvania.Welcome from another Pennsyltuckian :)
-
I am a new member of the forum and a new Jeep owner. I have a 2016 Jeep Wrangler Sport with a 3.6 Pentastar engine and a 6 speed manual...
-
pc1p replied to the thread Wrangler beast mode!.And fixing this by going with a proper axle ratio will COMPLETELY change the feel and drivability even more so... there's not much worse...
-
Finally Getting my 2012 JK Wrangler the way I want it. Even with 35's it flies and only runs 1800 rpms at 60 mph.
-
pc1p reacted to BLACKJKU's post in the thread 2012 JKU check engine at high RPM, then turns off with
Like.
Have you checked to see if the underhood insulation is getting sucked over the air intake, it's happened on a couple other Members Jeeps? -
pc1p reacted to BVlads51's post in the thread 2012 JKU check engine at high RPM, then turns off with Like.
I have not, I will check now. Thank you!
-
pc1p replied to the thread Anyone ever use this service?.If you have a 2012+, you can program your ECM with a handheld tuner (like HPTuner), though the more common ECU interfaces (like JScan)...
-
pc1p replied to the thread 285/75/17 on stock wheels? 315s?.I ran 285's on 4.75" BS wheels and they rubbed the inner fender and sway bar quite a bit at near-full lock (on a 2.5" MC Gamechanger)...
-
pc1p replied to the thread 3.8 misfire.Since you had misfires on the same side, this was my first guess - so glad that you found it. The strap goes from the back of the...
-
Found the braided ground totally rotted of down at the block. Now I need to find the other end and reconnect. Hopefully this solves the...
