pc1p's latest activity
-
pc1p replied to the thread Baseline 4x4.For sure! These are a good upgrade over your current setup and can easily "grow" with your modest build plans and requirements. -
I don't do rock crawling, mostly trails and overlanding. My '07 Sahara is factory stock with no lockers, etc D30/44 with 4.10s and it...
-
pc1p replied to the thread Loose steering wandering.It is hard to say definitively without some additional information. The vehicle looks lifted and appears to have some quality components...
-
Your comments are super helpful m especially to add real experience for the setup I’m considering. It’s a 2017 JKU and there’s nothing...
-
pc1p replied to the thread Wrangler sounds different after taking it out of 4WD.How many miles on your Jeep? Do you know the service history? Might be worth taking to one of the many 4x4-oriented shops in the area to...
-
pc1p reacted to Severus's post in the thread Wrangler sounds different after taking it out of 4WD with
Like.
Oh wow - you taught me something new about going into 4WD - TY! The sound just started when I went back into 2WD. I backed up into my... -
Thank you. That video helped quite a bit to understand where the tone ring was able to be accessed. Like I said previously, I have an...
-
Thanks for that last comment because it’s about $300 difference between the recon and ultimate 44. I considered that approach but then...
-
It’s running the larger tires. If I were starting with anything other than the 3.21s, i probably wouldn’t do it. Especially if i started...
-
pc1p replied to the thread Baseline 4x4.What year is your JK and what transmission? I’m assuming a 6-speed since you mentioned 3.21 gearing. With a 3.6L model and 4,10’s, you’d...
-
-
pc1p replied to the thread Wrangler sounds different after taking it out of 4WD.So a couple things... First, you don't need to shift to Neutral to go into 4Hi. You don't even need to be stopped. As a matter of fact...
-
pc1p replied to the thread Speed sensor issue.The OEM tone ring can be kind of a pain in the a$$ to get to, but is doable with hand tools, patience, and some brake cleaner. The...
-
-
pc1p replied to the thread Wrangler sounds different after taking it out of 4WD.What kind of sound, clunk? Clank? Click? Does it make sound when moving? Did you take it off-roading at all? It's possible that...
-
I decide to not touch those fittings, I cut the tube closer to the engine front/oil pan and used a -8an to compression fitting adapter...
-
pc1p replied to the thread Baseline 4x4.What's the thought behind the pizza cutters, instead of the more commonly available 35x12.5"? (not questioning anything, just curious :)...
