Anybodyhome
USN Retired (1973-1993) From Nashville, NC
Latest activity Postings Images About
-
-
Anybodyhome replied to the thread Teraflex ST1 1.5" kit.I can attest. My 2.5" lift was a perfect fit for my JKU and the stance was everything I wanted. That is, until I replaced the factory... -
People add spacers all the time to get the stance they want, it's not uncommon at all. I doubt you are actually experiencing "sag" but...
-
Anybodyhome replied to the thread New speakers sound punchy.I replaced my overhead speakers a few years ago with a pair of Rockford Fosgate and couldn't be happier, once I got the factory head...
-
I have a couple of questions. I know you said everything else is factory but.... 1. Is your head unit factory or aftermarket? 2. Are...
-
Anybodyhome replied to the thread Driveshaft clicking only when turning in 4WD.I concur with the driveshaft u-joint. Especially if your ride has a lift, but less than 2.5 or 3", which does not necessarily require a...
-
Anybodyhome reacted to BLACKJKU's post in the thread Driveshaft clicking only when turning in 4WD with
Like.
My guess would be either driveshaft U-joint or the U-joints in the axle shafts. -
Anybodyhome replied to the thread Shaky steering.A lot of tire shops are using adhesive weights on the inside of an aftermarket wheel. I used to check mine periodically and it was very...
-
Your ideal tire pressure is going to be closer to 26-28 psi, I can almost guarantee it. I would take the wheels in and have them...
-
Anybodyhome replied to the thread OEM remote start kit addition on 2018 JKU.If you attempt this on your own with JScan, go to the Apple or Google app store, depending on your phone, and make sure your JScan app...
-
Anybodyhome reacted to Chris's post in the thread OEM remote start kit addition on 2018 JKU with Like.
Many folks have successfully programmed the WIN module using the J-Scan app, provided they have the right firmware version and...
-
Anybodyhome replied to the thread What's leaking in this photo?.If it's bumps and jolts that cause the noise, getting it up on a rack would allow someone to recreate it. Moving wheels, axles, shocks...
-
Anybodyhome replied to the thread What's leaking in this photo?.If it's bumps and jolts that cause the noise, getting it up on a rack would allow someone to recreate it. Moving wheels, axles, shocks...
-
Looks like the pinion seal. Doesn’t appear to be leaking too bad as it isn’t throwing gear oil around on adjacent surfaces. Is there...
-
Anybodyhome replied to the thread What's leaking in this photo?.Appears to be a rear differential seal leak. It could also be the pinion gear seal. I'm being honest when I tell you this is not...
-
Anybodyhome replied to the thread Dune flag options.JDS Customs makes a couple different styles under $20. https://www.jdscustoms.com/product/clamp-on-dune-safety-flag-mount-straight/...
-
-
Loading…
-
Loading…
-
Loading…