Dirty Dog

Supporting Member Lifetime Supporting Member

JK Addict 63 From Pueblo West, CO

Joined: Sep 18, 2022

Last seen: Today at 6:09 PM

Latest activity Postings Attachments Images About

- Dirty Dog reacted to JeepJeezy's post in the thread Replacing Battery Terminals with Like.
  
  I also have winch and lights connected to these clamps. Zero issues. In my picture further up you can see my winch disconnect installed.
  
  Wednesday at 5:06 PM
- Dirty Dog reacted to WestCoastDan's post in the thread Replacing Battery Terminals with Like.
  
  For "extra connections", these clamps work great because the cables are attached using lug-type terminals and they can be arranged on...
  
  Wednesday at 5:05 PM
- Dirty Dog reacted to Danarch's post in the thread Replacing Battery Terminals with Like.
  
  Thank for the info. I am going to give the other shot. Have lights, winch etc. etc. so the extra connection points will be nice...
  
  Wednesday at 5:05 PM
- Dirty Dog reacted to Danarch's post in the thread Replacing Battery Terminals with Like.
  
  Thank you for the reply. Clamps and tool (not cheap tool) ordered. Most likely will attempt install Saturday, but I’d do volunteer to...
  
  Wednesday at 5:05 PM
- Dirty Dog replied to the thread Method beadgrips.
  
  Interesting. I never had any problems, and that Jeep did some gnarly stugg.
  
  Tuesday at 11:19 PM
- Dirty Dog reacted to pc1p's post in the thread Method beadgrips with Like.
  
  I heard of stories of chaffing the inner edges and face that touches the wheel, causing early failure. Don't know how true it is across...
  
  Tuesday at 11:18 PM
- Dirty Dog replied to the thread Method beadgrips.
  
  My favorite bead locks of all time were the Staun internal bead locks. Not sure why they've never caught on. I ran them on a V8 swapped...
  
  Monday at 10:26 PM
- Dirty Dog reacted to pc1p's post in the thread How do I get this out? with Like.
  
  Only real way I can see you being able to do it now would be to pull the pitman arm off the gear - or alternatively pull the gear of the...
  
  Monday at 10:22 PM
- Dirty Dog reacted to JeepJeezy's post in the thread How do I get this out? with Like.
  
  So is the whole ball joint is still in the pitman arm? If so, did you remove the cotter pin and nut from the top of it and try a ball...
  
  Monday at 10:22 PM
- Dirty Dog replied to the thread Method beadgrips.
  
  I've never used that brand. But if you're building for tough trails, get real bead locks. The method bead grip is intended to keep the...
  
  Sunday at 10:12 PM
- Dirty Dog reacted to Danarch's post in the thread What did you do to your JK today? with Like.
  
  Went with a couple of friends I the wife’s Jeep to Hungalelti Trail yesterday.
  
  Sunday at 10:07 PM
- Dirty Dog reacted to 1o1Proof's post in the thread What did you do to your JK today? with Like.
  
  Also, finally got my winch reinstalled after the bumper upgrade. Yay me... Really like the new OuttaHand Fab bumper compared to the god...
  
  Saturday at 9:32 AM
- Dirty Dog reacted to 1o1Proof's post in the thread How do I fix these wires? with Like.
  
  Should be very easy to splice them back together. If there isn't enough slack in the harness, add a little wire to each and call it a...
  
  Saturday at 9:32 AM
- Dirty Dog reacted to pc1p's post in the thread 2008 JKU "Argenta" Build Thread with Like.
  
  Got this done today… Despite cleaning the $hit out of this axle, and preheating it twice with a MAPP torch, my first pass on both sides...
  
  Nov 8, 2024
- Dirty Dog replied to the thread Recommended product to restore black trim and fender flares.
  
  I don't think I missed it, I think I just disagree with your suggestion that "most" apply too thin a coating. I certainly haven't got...
  
  Nov 7, 2024
Show older items
Loading…
Loading…
Loading…
Loading…

Top Bottom

Search

Search

Dirty Dog

Find content

Latest activity Postings Attachments Images About