Anybodyhome
USN Retired (1973-1993) From Nashville, NC
Latest activity Postings Images About
-
-
Anybodyhome replied to the thread Thermostat is baffling me.Typically, with air remaining in the cooling loop, the temp gauge will bounce all over, going hot, cooling off, etc. When you get the... -
Anybodyhome replied to the thread Thermostat is baffling me.Been there, done this. The best, easiest and quickest way to check your t-stat and make sure it's opening at the proper temp, or if it's...
-
Anybodyhome replied to the thread Code P0733.Found this: Yes, cold weather can significantly affect Jeep Wrangler shift solenoids, primarily by thickening the transmission fluid...
-
Anybodyhome replied to the thread Oil change and new ticking.When it comes to cabin size and comfort, inches make all the difference in the world. Jeep could add 4" to the overall width of the body...
-
-
Good to hear you will hang around a little. I have always appreciated your input and solutions. I am not as tall but probably a little...
-
Anybodyhome replied to the thread Oil change and new ticking.Unless they design a cabin that will allow a 70-year old, 6'6", 300lb guy with bad knees to stretch out a little, I don't see another...
-
Anybodyhome replied to the thread Oil change and new ticking.My 2014 JKU was sold today. The 10 years I had with my Jeep will never be forgotten. My wife even told me earlier today, "Say goodbye...
-
-
Anybodyhome replied to the thread Oil change and new ticking.Yeah, I was quo I was quoted between $10-11k just for a reman 3.6 motor. Regardless, I have an offer and will be meeting a buyer Tuesday.
-
That's almost 1/2 way into a Hemi swap... just sayin' :)
-
Anybodyhome replied to the thread Oil change and new ticking.New cooling fan unit, water pump, flush, heads resurfaced.... another $4k.
-
How much that set you back? If you don't mind answering. I often think about what potential future problems would cost me. 🙈
-
Anybodyhome replied to the thread Oil change and new ticking.As soon as I heard the tick (about 140k miles) I made plans to get all the work done. Very happy with the independent shop who did the...
-
If they can get you one, I'd definitely do it while you're already there! I did mine 2 years ago, this was pre-3.6 tick 😒
-
Anybodyhome replied to the thread Oil change and new ticking.Had mine done last year- cams, lifters, rockers, plugs, PCV... about $4k.
-
Anybodyhome replied to the thread Rotational noise.Get it into a shop now. That sounds like a ball joint almost gone or a u-joint.
-
-
Loading…
-
Loading…
-
Loading…
