Factory Moab Wheel Question

[John Cooper]

I have taken possession of 7 17" factory Moab wheels. I'm wanting to get rid of the chrome being wheels on the JK.

I have 285/75/17 tires now, will the Moabs and 285's work without spacers without rubbing?

 

[tJKrider]

I have taken possession of 7 17" factory Moab wheels. I'm wanting to get rid of the chrome being wheels on the JK.

I have 285/75/17 tires now, will the Moabs and 285's work without spacers without rubbing?

I don't have a direct answer for you but will await a response as I've considered this size long-term once I install a proper lift.

My guess is that you wouldn't absolutely need spacers but may have a bit of rub at full lock unless you add some washers to limit the steering (similar to running 285/70R17s)

 

[Chris]

Yes, you can run 285/75R17s on a stock JK, but expect possible light rubbing at full steering lock and especially when flexing off-road. F

Ideally you'll want a 2" lift, but they will work!

 

[John Cooper]

Yes, you can run 285/75R17s on a stock JK, but expect possible light rubbing at full steering lock and especially when flexing off-road. F

Ideally you'll want a 2" lift, but they will work!

Thanks Chris!!

From what I can tell, I do have a 2 inch lift.

Will be swapping tires to the 17" Moabs next week at work!!

 

[Chris]

Thanks Chris!!

From what I can tell, I do have a 2 inch lift.

Will be swapping tires to the 17" Moabs next week at work!!

You'll be squared away in that case!