Turn signals not working on new LED headlights

[Brownies]

Hello,

FIRST POST!

Jeep JKU 2015 Sahara

I just swapped my fron lights out for:
https://www.amazon.ca/dp/B09CKN6CK6/?tag=tjforum-20

Install went as planned and i have power, but the turning signals are not activating... and help with this would be appriciated!

 

[Chris]

The turn signal wire coming from the headlights needs to be tapped into the turn signal wire on each side of the vehicle. You can very easily find out which wire is the turn signal wire by using a test light and turning on the turn signals. Whichever wire causes the test light to blink will be the wire to tap into for that side.

 

[Brownies]

Weird though... i used the same connector as the original. In my head i was thinking that it should be plug and play?

 

[Brownies]

Hello,

Wanted to thank you... seems the issue went away... flasher is now working. Next rear lights and side turning signal!

 

[Brownies]

Hi again,

I just realized that the turning signals stop working when the headlights are set to auto?!? Any thoughts on this? has any one else seen this?

 

[Acxman]

Look up changing lights to LEDS on you tube. some (maybe all?) of the led replacements come with a adapter that has a little module incorporated with the wiring .