Novak Conversions Jeep Wrangler JK engine mounts

Red lightning bolt of death

ethancarroll03

New Member
Joined
Aug 8, 2023
Messages
3
Location
Columbus, GA
Hey guys, I am once again having the issue with my 09 JK 2D. I purchased the vehicle used and on the ride home after the sale was finalized, the light cut on and went into limp mode. I've owned it for almost 2 months now and every ride except for a 2 week span has caused for the light to come on. The fixes used then was when I replaced the pedal assembly and disconnected the battery terminals for 5 hours.

Things done to the Jeep before I received it:
- New throttle body
- New pedal assembly

Things done after I purchased the Jeep
- New pedal assembly
- New battery
- New wiring harness for throttle body

Code being thrown is P2122. I am at an absolute loss on what could be causing it. All grounds have been checked and have been fine in the engine bay. Any help would be greatly appreciated. The trigger that caused it to cut back on after the 2 weeks it ran great was taking it through the car wash and spraying the front end. Ever since, it has continued to cut on
 
This is how I fixed my lightning bolt after replacing my Throttle Body.

 
This is how I fixed my lightning bolt after replacing my Throttle Body.

I appreciate the response, unfortunately I do this every time I get into it to clear the code but no matter how fast or slow I do it, the code always fights back
 
Novak Conversions Jeep Wrangler JK engine mounts