Need help finding cowl cover corners

[egees]

Hi guys,

I am a newly minted proud owner of a 2010 Jeep JK with a missing cowl cover! Tried searching high and low on MOPAR's official site and various other Jeep parts retailers but I am unable to find the part number or any site that sells the cowl covers (please refer to white arrows below).

Would really appreciate if someone could point me to a site or provide me the part number of the cowl covers for a 2010 JK.

Thank you in advance.

 

[Anybodyhome]

Rock Auto:
https://www.rockauto.com/en/catalog/jeep,2010,wrangler,3.8l+v6,1444643,body,cowl+panel,1256

This is a cover, but MOPAR shows the side cowls to be part of the fender:
https://www.factorychryslerparts.com/showAssembly.aspx?ukey_assembly=579625&ukey_product=13180343

 

[BLACKJKU]

Is this what your looking for?

https://www.amazon.com/dp/B016XJ9NZY/?tag=jkforum-20

 

[Chris]

Just so you know, those parts are welded on as well

 

[Anybodyhome]

Is this what your looking for?

https://www.amazon.com/dp/B016XJ9NZY/?tag=jkforum-20

That part is just a cover over the existing cowl.
Either the photo or his description is off, because the picture shows the cowl intact, but his text says a "missing cowl cover." Technically the Jeep doesn't come with a cowl cover, it's an aftermarket thing. The actual cowl, as Chris mentioned, is a welded body part attached to the fender, as shown in the MOPAR drawing I inserted in my post.

 

[BLACKJKU]

That part is just a cover over the existing cowl.
Either the photo or his description is off, because the picture shows the cowl intact, but his text says a "missing cowl cover." Technically the Jeep doesn't come with a cowl cover, it's an aftermarket thing. The actual cowl, as Chris mentioned, is a welded body part attached to the fender, as shown in the MOPAR drawing I inserted in my post.

He said missing cowl cover so I showed him that to see if that was what he was asking, trying to figure out also.