I know this has been addressed multiple times before but my situation is a bit different. My incandescent turn signals were working fine. I decided to replace them with LEDs. I put in front LED turn signals and rear LED brake/turn lights and LED headlights. They worked fine for a few years. Out of the blue this past year the turn signals started hyper flashing. I checked and the LEDs I bought came with a resistor built in and they appear to be still connected and working. After reading about the problems with hyper flashing due to LEDs, I removed the front LED turn signals and replaced them with new incandescent lights. (They actually look much better and are brighter too.) The passenger side directional is fine now, no hyper flashing. The drivers side still hyper flashes. I have a few sketchy connections that I did with black tape on there right now. I plan on soldering everything when it warms up here in New England someday. I just don't know if it could be the wiring? Maybe the connections aren't the greatest with some of the wires? Could that cause hyper flashing on just one side?
Thank you for any suggestions you can think of.
Thank you for any suggestions you can think of.