Forums
New posts
Search forums
Image search
Shop
Amazon Store
T-Shirts
Stickers
Members
Current visitors
Supporting Member Upgrade
Sponsors
About
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Image search
Search
Search titles only
By:
Search titles only
By:
Menu
Install the app
Install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Jeep Wrangler JK Resources
JK How-to Guides
How to Replace Wheel Studs on a Jeep Wrangler JK
Reply to thread
Message
<blockquote data-quote="Chris" data-source="post: 420222" data-attributes="member: 1"><p>The Jeep Wrangler's wheels are held in place by wheel studs. The lug nuts go over the studs to hold the wheels in place when you're driving. Sometimes, these studs could get stripped, it could happen by over-tightening the lug nuts when you're replacing the tire. The more stripped they are, the less they hold the wheels in place. So whether you do a lot of off-roading or you simply drive exclusively on the road, having sturdy, threaded wheel studs is an absolute necessity in ensuring a safe drive. Read on to learn how you can replace them and install new ones in their place.</p><p></p><p>[ATTACH=full]113449[/ATTACH]</p><p>Figure 1. Stripped wheel studs.</p><p></p><p>[ATTACH=full]113450[/ATTACH]</p><p></p><p></p><p><strong>Materials Needed</strong></p><ul> <li data-xf-list-type="ul">Jack and jack stands</li> <li data-xf-list-type="ul">Tire iron</li> <li data-xf-list-type="ul">Hammer</li> <li data-xf-list-type="ul">New wheel studs</li> </ul><p><span style="font-size: 18px"><strong>Step 1 – Raise car and remove wheel</strong></span></p><p>Loosen the lug nuts on the wheel you will be working on, then raise the car. Secure your Jeep using your jack stands, then remove the lug nuts and wheel.</p><p></p><p>[ATTACH=full]113451[/ATTACH]</p><p>Figure 2. Loosen lug nuts.</p><p></p><p>[ATTACH=full]113452[/ATTACH]</p><p>Figure 3. Raise Jeep and secure with jack stands.</p><p></p><p><span style="font-size: 18px"><strong>Step 2 – Remove brake caliper</strong></span></p><p>To remove the caliper, you will need to remove the two rear bolts holding it in place. Use your 18mm socket to remove the two caliper bolts, then remove the caliper. Make sure to not let it hang from the brake line; either set it somewhere safe or hang it from the coil spring using a wire hanger, or something similar.</p><p></p><p>[ATTACH=full]113453[/ATTACH]</p><p>Figure 4. Remove brake caliper.</p><p></p><p><span style="font-size: 18px"><strong>Step 3 – Remove brake rotor</strong></span></p><p>Before you remove the brake rotor, remove the rotor retainers. There are little washers that go on top of the studs. Finally, remove the rotor by pulling it out. If you're having a hard time doing so, tap it with a rubber mallet to get it loose, then pull it straight out.</p><p></p><p>[ATTACH=full]113454[/ATTACH]</p><p>Figure 5. Rotor retainer.</p><p></p><p>[ATTACH=full]113455[/ATTACH]</p><p>Figure 6. Remove brake rotor.</p><p></p><p><span style="font-size: 18px"><strong>Step 4 – Hammer out old stud</strong></span></p><p>Use your hammer to hammer out the old stud. Be sure to hit it straight back so it doesn't bend. Don't worry about ruining it, as long as you can get it all the way out.</p><p></p><p>[ATTACH=full]113456[/ATTACH]</p><p>Figure 7. Hammer out stripped stud.</p><p></p><p><span style="font-size: 18px"><strong>Step 5 – Install new stud</strong></span></p><p>Feed the new stud through, and as soon as it shows on the outside, use one of the lug nuts to help get it through. As you tighten the lug nut, the stud will come through more and more, so be sure it's going in straight.</p><p></p><p>[ATTACH=full]113457[/ATTACH]</p><p>Figure 8. Use lug nut to get stud through.</p><p></p><p>[ATTACH=full]113458[/ATTACH]</p><p>Figure 9. New stud in place.</p><p></p><p><span style="font-size: 18px"><strong>Step 6 – Install components</strong></span></p><p>Install the brake rotor in place, then install rotors retainers. Install the brake caliper on top of the rotor, then tighten the two rear bolts using your 18mm socket. Finally, put the wheel in place, hand-tighten the lug nuts, lower the car, and tighten the lug nuts in a star fashion.</p><p></p><p>[ATTACH=full]113459[/ATTACH]</p><p>Figure 10. Install wheel and tighten lug nuts.</p></blockquote><p></p>
[QUOTE="Chris, post: 420222, member: 1"] The Jeep Wrangler's wheels are held in place by wheel studs. The lug nuts go over the studs to hold the wheels in place when you're driving. Sometimes, these studs could get stripped, it could happen by over-tightening the lug nuts when you're replacing the tire. The more stripped they are, the less they hold the wheels in place. So whether you do a lot of off-roading or you simply drive exclusively on the road, having sturdy, threaded wheel studs is an absolute necessity in ensuring a safe drive. Read on to learn how you can replace them and install new ones in their place. [ATTACH=full]113449[/ATTACH] Figure 1. Stripped wheel studs. [ATTACH=full]113450[/ATTACH] [B]Materials Needed[/B] [LIST] [*]Jack and jack stands [*]Tire iron [*]Hammer [*]New wheel studs [/LIST] [SIZE=18px][B]Step 1 – Raise car and remove wheel[/B][/SIZE] Loosen the lug nuts on the wheel you will be working on, then raise the car. Secure your Jeep using your jack stands, then remove the lug nuts and wheel. [ATTACH=full]113451[/ATTACH] Figure 2. Loosen lug nuts. [ATTACH=full]113452[/ATTACH] Figure 3. Raise Jeep and secure with jack stands. [SIZE=18px][B]Step 2 – Remove brake caliper[/B][/SIZE] To remove the caliper, you will need to remove the two rear bolts holding it in place. Use your 18mm socket to remove the two caliper bolts, then remove the caliper. Make sure to not let it hang from the brake line; either set it somewhere safe or hang it from the coil spring using a wire hanger, or something similar. [ATTACH=full]113453[/ATTACH] Figure 4. Remove brake caliper. [SIZE=18px][B]Step 3 – Remove brake rotor[/B][/SIZE] Before you remove the brake rotor, remove the rotor retainers. There are little washers that go on top of the studs. Finally, remove the rotor by pulling it out. If you're having a hard time doing so, tap it with a rubber mallet to get it loose, then pull it straight out. [ATTACH=full]113454[/ATTACH] Figure 5. Rotor retainer. [ATTACH=full]113455[/ATTACH] Figure 6. Remove brake rotor. [SIZE=18px][B]Step 4 – Hammer out old stud[/B][/SIZE] Use your hammer to hammer out the old stud. Be sure to hit it straight back so it doesn't bend. Don't worry about ruining it, as long as you can get it all the way out. [ATTACH=full]113456[/ATTACH] Figure 7. Hammer out stripped stud. [SIZE=18px][B]Step 5 – Install new stud[/B][/SIZE] Feed the new stud through, and as soon as it shows on the outside, use one of the lug nuts to help get it through. As you tighten the lug nut, the stud will come through more and more, so be sure it's going in straight. [ATTACH=full]113457[/ATTACH] Figure 8. Use lug nut to get stud through. [ATTACH=full]113458[/ATTACH] Figure 9. New stud in place. [SIZE=18px][B]Step 6 – Install components[/B][/SIZE] Install the brake rotor in place, then install rotors retainers. Install the brake caliper on top of the rotor, then tighten the two rear bolts using your 18mm socket. Finally, put the wheel in place, hand-tighten the lug nuts, lower the car, and tighten the lug nuts in a star fashion. [ATTACH=full]113459[/ATTACH] Figure 10. Install wheel and tighten lug nuts. [/QUOTE]
Verification
Post reply
Jeep Wrangler JK Resources
JK How-to Guides
How to Replace Wheel Studs on a Jeep Wrangler JK
Top
Bottom