Forums
New posts
Search forums
Image search
Shop
Amazon Store
T-Shirts
Stickers
Members
Current visitors
Supporting Member Upgrade
Sponsors
About
Log in
Register
Search
Search titles only
By:
Search titles only
By:
New posts
Search forums
Image search
Search
Search titles only
By:
Search titles only
By:
Menu
Install the app
Install
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Jeep Wrangler JK Resources
JK How-to Guides
How to Install a Trailer Harness on a Jeep Wrangler JK
Reply to thread
Message
<blockquote data-quote="xackley" data-source="post: 423561" data-attributes="member: 17509"><p>Quote from above:</p><p><strong>Step 2 – Remove tail light assembly</strong></p><p>The tail light assembly is held in place with four Phillips head screws. Remove all four and pull the assembly out. </p><p>End quote.</p><p></p><p>The photo of the red jeep shows the wrongs side, the yellow jeep photos are correct.</p><p>Also just the 2 inside screws need to be removed. </p><p>While in there check for mud salt and rust. I sprayed a little fluid film on the gas filler line as there was a little surface rust.</p><p></p><p>FYI</p><p>$45 hitch fit fine and has excellent welds and came with wiring harness.</p><p>I had to wedge the muffler forward a little to insert the bolts. short 2x4 spacer and a plastic wedge did the trick.</p><p><a href="https://www.amazon.com/gp/product/B00P32VQEE/?tag=jkforum-20" target="_blank">https://www.amazon.com/gp/product/B00P32VQEE/?tag=jkforum-20</a></p></blockquote><p></p>
[QUOTE="xackley, post: 423561, member: 17509"] Quote from above: [B]Step 2 – Remove tail light assembly[/B] The tail light assembly is held in place with four Phillips head screws. Remove all four and pull the assembly out. End quote. The photo of the red jeep shows the wrongs side, the yellow jeep photos are correct. Also just the 2 inside screws need to be removed. While in there check for mud salt and rust. I sprayed a little fluid film on the gas filler line as there was a little surface rust. FYI $45 hitch fit fine and has excellent welds and came with wiring harness. I had to wedge the muffler forward a little to insert the bolts. short 2x4 spacer and a plastic wedge did the trick. [URL]https://www.amazon.com/gp/product/B00P32VQEE/?tag=jkforum-20[/URL] [/QUOTE]
Verification
Post reply
Jeep Wrangler JK Resources
JK How-to Guides
How to Install a Trailer Harness on a Jeep Wrangler JK
Top
Bottom