Novak Conversions Jeep Wrangler JK engine mounts

How much transmission fluid for a 2013 JK with an automatic transmission?

dardas

New Member
Joined
Dec 18, 2020
Messages
3
Location
Seattle, WA
Need some help, please.

I've been scouring the internet and this forum to find out exactly how much ATF+4 transmission fluid I need for a pan-drop fluid change on a 2013 Automatic.

Haynes suggests 4 quarts, another site suggests 6.5, another states 8.8, etc...

I guess I could just over-buy, measure what comes out, and then return the rest to the store, but I'd like to get a decent idea before I head to the local NAPA.

Thanks so much!
 
Jeep Wrangler JK Fluid Capacities
ComponentQuantityFluid Type
3.6L Cooling System (2013-2018)10.5 Quarts50/50 Antifreeze/Water Mix
3.6L Cooling System (2012)13 Quarts
NSG370 6-Speed Manual1.6 Quarts / 1.5 LitersMopar Manual Trans Lubricant or Equivalent
NAG1 5 Speed Auto5.3 Quarts for Pan Drop, 8.1 Quarts for Dry FillATF 4
 
  • Like
Reactions: Chris and dardas
Jeep Wrangler JK Fluid Capacities
ComponentQuantityFluid Type
3.6L Cooling System (2013-2018)10.5 Quarts50/50 Antifreeze/Water Mix
3.6L Cooling System (2012)13 Quarts
NSG370 6-Speed Manual1.6 Quarts / 1.5 LitersMopar Manual Trans Lubricant or Equivalent
NAG1 5 Speed Auto5.3 Quarts for Pan Drop, 8.1 Quarts for Dry FillATF 4
Brilliant! Just what I was looking for. Thanks so much. Where did you find that?
 
  • Like
Reactions: mrjp
Novak Conversions Jeep Wrangler JK engine mounts